DESCRIPTION The Micro Link IR Receiver is a small peep-hole style infrared repeater assembly. The Micro Link IR Receiver is equipped with a 7-foot cable and a 3.5mm stereo mini plug, which is plugged directly into the “IR RCVR” jack on the connecting block, such as the models 789-44, CB60, and 791- 44. The Micro Link IR Receiver is primarily intended for use in installations where the connecting block is within reach of its 7-foot cable – as when installing the Micro Link IR Receiver in a cabinet where the controlled equipment is behind closed doors. FEATURES · Small size; mounts in 1/2” diameter hole. 2 inches deep (50mm). · Quick-Connect 3.5mm Stereo Mini Plug on 7ft. cable for direct plug-in to Xantech Connecting Blocks. · Works in normal 3-wire mode (12VDC, IR, GND). · Green Talkback LED for System Verification. SPECIFICATIONS · Infrared modulation frequency bandwidth: 25 – 60 kHz. · IR reception range: Up to 120 feet, depending on remote control output strength and ambient conditions. · Reception angle: 55 degrees off axis for 50% range reduction. · Cable requirements: 3-conductor. Use 24 gauge up to 200’, 22 gauge up to 600’ 20 gauge up to 2000’, 18 gauge up to 5000’ – unshielded OK. · Max. transmission length: 1 mile using 18 gauge wire. · Maximum current output: 100mA · Drives IR emitters through Xantech Connecting Blocks, Controllers, etc. · Dimensions: 0.7” diameter x 2.2” deep (18mm x 56mm). · Power requirements: +12VDC, 20mA.
