This motor is for our 85"-93" models on 12s lipo and Castle160HV speed controller. 12S Lipo operation and 160 Amp HV speed controller minimum. 60CC notes: Our testing carried out on Castle firmware V4.22, expect 130 amps on fresh lipo packs using largest prop, for approximately 6,000 watts. (Castle firmware 4.22 was written specifically for the XPWR motors, it is the best firmware in the castle catalog for our motors, please backdate your firmware to 4.22 using your Castle Link) Weight: 1168 grams (including radial mount and prop adapter) KV: 190 Pole: 24 Stator Poles Bullet connectors: 8.0 mm female installed, male bullet connectors included 10mm Prop Shaft Recommended prop: 24 x 10, 24 x 12, 24x13 Note on using largest prop recommendation for each motor: The largest prop recommendation for each motor is a maximum-performance prop for 3D and extreme aerobatic flying. It is not needed or recommended for sport flying where long, sustained full-throttle usage is intended. It is for aerobatic flight where full-throttle is used in bursts. Maximum temperature (on outside of motor): 175F / 80C
