The xTool SafetyPro AP2 / AP2 Max Air Purifier with SuperCyclone provides advanced smoke, dust, odor, and fume filtration for laser cutting and engraving environments. Designed to work with compatible xTool laser machines, the SafetyPro system uses a multi-stage filtration system and SuperCyclone technology to separate larger particles before they reach the filters, helping extend filter life while maintaining effective air purification. The xTool SafetyPro AP2 uses 36 cyclones and a five-stage filtration system consisting of a pre-filter, medium-efficiency filter, activated carbon filter, ultra-dense carbon mesh filter, and high-efficiency filter. It provides airflow of up to 150 m³/h with four adjustable airflow levels and operates at approximately 55 dB. The AP2 is compatible with a wide range of xTool laser machines, including the P3, P2S, P2, S1, M1 Ultra, F1, F1 Ultra, F2 and F2 Ultra series, as well as other compatible xTool machines. The SafetyPro AP2 Max takes filtration performance further with 72 SuperCyclone units, 700 m³/h airflow, and a seven-stage filtration system that adds a dedicated formaldehyde-removal filter. xTool states that the AP2 Max provides more than four times the service life and 4.67 times the airflow of the AP2 under the same working conditions. Its filtration system is designed for applications ranging from desktop laser machines to larger industrial equipment such as the xTool P3 and MetalFab. Both models can be connected to compatible xTool machines and managed through xTool software. When connected to supported machines, automatic airflow control can adjust purification performance based on the material being processed. The AP2 and AP2 Max can also continue operating for a set period after a laser job finishes, helping remove remaining smoke and fumes from the processing environment. The xTool P3 can connect to either purifier without requiring a separate Bluetooth dongle. Whether you are looking for a compact air purification solution for a desktop laser or higher-capacity filtration for the xTool P3 and other demanding applications, the SafetyPro AP2 and AP2 Max provide dedicated smoke and odor removal with intelligent airflow management and replaceable filtration systems. xTool SafetyPro AP2 Air Purifier with Supercyclone System Engineered for all laser users, exceptional dust and odor removal. Your browser does not support our video. Features: The Safer Way to Create xTool SafetyPro Series Which One Suits You Better? 6 Stages of Filtration 6-stage filtration weighs 20lbs (without the cyclone layer, the remaining 5 filters weigh 17lbs), ensuring maximum removal of fumes and odors during laser processing. Capture 99% of Large Particles 36 small cyclone groups operate in parallel, generating super centrifugal force, efficiently separating dust and dirt, and preventing clogging of filters. Your browser does not support our video. Expand Pre-filters Lifespan by 10 times With a cyclone in place, all large particles can be separated, extending the lifespan of filters up to 10 times compared to those without a cyclone. *The results estimate the filtration of residue from the regular laser cutting of 3mm acrylic and basswood. Your browser does not support our video. Washable and Reusable It is easy to clean and reuse. Simply wash it to keep the cyclone working like new, saving you the cost of replacing pre-filters. VOC Removal Tested with PID Sensor Equipment Your browser does not support our video. Intelligent Control Built with Convenience in Mind Auto-On/Off, Sync with xTool Lasers The purifier automatically starts and shuts down with the xTool lasers. You can also customize the shutdown time to ensure all fumes are expelled. Settings for Every Material The purifier automatically matches the optimal filtration mode based on the material selected by the user. Filter Life Cycle Monitoring The system monitors filter usage in real-time, preventing premature replacements or missed change intervals, and optimizing cartridge efficiency. Specifications Specification AP2 AP2 Max Cyclone System 36 Cyclones 72 Cyclones Airflow 150 m³/h 700 m³/h Filtration 5-Stage 7-Stage Airflow Control 4 Levels 1–100% Noise Level 55 dB 65 dB Formaldehyde Filter No Yes Recommended For Desktop Laser Machines Larger and Industrial Laser Machines xTool P3 Compatible Yes Yes
