No more frustration Wireless systems. They're not always the easiest things to get on with. They can be difficult to setup, complicated to use, and they can really start to take up space in your rack. But at the same time, they're one of the most powerful tools available for any performer. What if we told you there was a way that you could take advantage of the benefits of wireless, but without the complexities and frustration that often go along with it? Meet the Xvive U3. An incredibly intuitive system that takes the pain out of going wireless. This flexible all-in-one solution consists of a plug-on transmitter, and a plug-on receiver. You can plug the transmitter directly onto the end of your favourite dynamic or battery-powered condenser microphone. This can then send your signal straight to the receiver which can be plugged into the XLR input of your mixer, audio interface, or other device. It's easy to use The controls on the U3 system are simple. On the receiver, there's a power switch and a channel selection control. On the transmitter, there's a power/mute switch as well as the channel selection control too. The main difference in controls is that the transmitter also features a Mic/Line switch. This provides you with selectable modes so you can ensure that your system's performance is optimised for the equipment you're using. Once you've chosen your desired mode, simply select the channel you want to use, and you're all set. You can utilise up to six channels simultaneously, giving you plenty of scope for expanding your setup. And best of all, you don't have to worry about setting specific frequency bands or signal types (other than Mic or Line mode). It's all done automatically, so you can spend more time doing what you love, and less time setting up. And it sounds phenomenal Your sound is important. Xvive know that. That's why they designed the U3 to transmit your sound without sacrificing quality. The high-resolution (24-bit/48kbps) design ensure that every detail is transmitted with precision, so you can be heard with clarity without losing the nuances and dynamics that make your sound yours. Plus, with its broad (20Hz to 20kHz) audio frequency response, you can be sure that no elements of your sound are lost, as most microphones work firmly between that range. Features Intuitive plug-and-play wireless system for transforming your wired mic into a wireless one Can also be used to transmit audio from a mixer and other XLR output equipment to speakers, recording systems, portable PAs, and more Takes the complexity and frustration out of traditional wireless systems, providing a flexible, all-in-one wireless solution Less than 5ms of latency for maximum performance and optimal synchronisation Boasts a broad 20Hz to 20kHz audio frequency response (dependent on microphone and input level) Take advantage of a vat indoor unobstructed operating range of up to 90ft Built-in rechargeable batteries in both components provide up to five hours of battery life Can be used with dynamic microphones, as well as battery-powered condenser microphones Switchable modes - Mic mode for use with microphones, and Line mode for other equipment and applications Pristine audio transmission with a high-resolution 24-bit/48kbps design Specifications System Tuning Bandwidth: 2.4GHz - 2.4835GHz Working Range: Up to 90ft unobstructed (dependent on RF signal absorption, reflection, and interference) Audio Frequency Response: 20Hz - 20kHz (-3dB) (dependent on microphone type or input signal) Dynamic Range: 110dB RF Sensitivity: -88dBm RF Output Power: 10mW E.I.R.P max. Total Harmonic Distortion: 0.2-percent Channel Count: Up to 6 channels U3 Transmitter Housing: Moulded plastic and cast metal Battery Type: 3.7V rechargeable Li-Ion, 860mA Battery Life: Up to 5 hours Input Connector: Balanced XLR, male Input Impedance: 15k Ohms (1kHz) Gain Adjustment Range: 0dB (mic), -10dB (line) Suitable Microphone Types: XLR dynamic, battery-powered XLR condenser Antenna Type: 1/4 wave sleeve dipole, non-removable (x 1) Antenna Impedance: 50 Ohms Dimensions: 31mm x 29mm x 98mm Weight: 93g U3 Receiver Housing: Moulded plastic and cast metal Battery Type: 3.7V rechargeable Li-Ion, 860mA Battery Life: Up to 5 hours Output Connector: Balanced XLR, female Output Impedance: 470 Ohms (1kHz) Maximum Output Level: 2.8Vp-p Antenna Type: 1/4 wave sleeve dipole, non-removable (x 1) Antenna Impedance: 50 Ohms Dimensions: 31mm x 29mm x 98mm Weight: 92g
