TRACPAK COMBO KIT TWO BOXES & QUICK RELEASE BASE (BLACK, YAKATTACK ORANGE, BATTLESHIP GREY): We wanted the ability to mount one or two storage boxes on a MightyMount or GearTrac, and with the TracPak, you can stack two boxes onto a single mounting point, helping save track space for other accessories. The TracPak features a quick release track base compatible with all YakAttack MightyMounts, GearTrac, and most other factory-installed kayak track. When attached to a track, the Quick Release Base features an array of slots, allowing for micro-adjustments in each direction of the t-bolt. This should maximize compatibility by increasing the locations where the TrackPak will fit on your watercraft. If you would rather surface mount the quick release base, included are stainless steel screws for attachment on the BlackPak Pro, the deck of your kayak, or other flat surfaces. For surface mounting on anything other than the BlackPak Pro, a 1/8” drill bit will be required for the installation. Please use a handheld screwdriver and ensure not to overtighten the stainless screws. The stackable storage boxes quickly and securely snap onto the base and on top of each other. When two boxes are stacked on top of each other, you have the ability to not only access the top box, but you can access the bottom box. With interior dimensions measuring 8.375” x 5.375” x 2.375”, there are many ways to utilize this secure quick access storage box. From tools to terminal tackle, the TracPack is a unique and handy storage solution for both recreational and kayak anglers. Sold as a two-pack of storage boxes and includes the quick release base. The TracPak is not waterproof or water-tight and does not float, so each storage box features an eyelet if you choose to use a leash for added security. For enhanced organization, included are four white labels. These adhesive labels are designed to fit on the latch of each box and create an area to identify the contents inside each box using a permanent marker like a Sharpie. If you need replacements or want to have spare boxes, additional TrackPak boxes and the quick release base are also sold separately. FULLY LOADED TRACPAK COMBO KIT TWO BOXES, TRACK MOUNT, HANDLE, AND THREE TRAYS: This kit includes everything that comes with the standard TracPak Combo Kit with the addition of the Quick Release Handle and three interior storage trays. We wanted the ability to mount one or two storage boxes on a MightyMount or GearTrac, and with the TracPak, you can stack two boxes onto a single mounting point, helping save track space for other accessories. The TracPak features a quick release track base compatible with all YakAttack MightyMounts, GearTrac, and most other factory-installed kayak track. When attached to a track, the Quick Release Base features an array of slots, allowing for micro-adjustments in each direction of the t-bolt. This should maximize compatibility by increasing the locations where the TrackPak will fit on your watercraft. If you would rather surface mount the quick release base, included are stainless steel screws for attachment on the BlackPak Pro, the deck of your kayak, or other flat surfaces. For surface mounting on anything other than the BlackPak Pro, a 1/8” drill bit will be required for the installation. Please use a handheld screwdriver and ensure not to overtighten the stainless screws. The stackable storage boxes quickly and securely snap onto the base and on top of each other. When two boxes are stacked on top of each other, you have the ability to not only access the top box, but you can access the bottom box. With interior dimensions measuring 8.375” x 5.375” x 2.375”, there are many ways to utilize this secure quick access storage box. From tools to terminal tackle, the TracPack is a unique and handy storage solution for both recreational and kayak anglers. Sold as a two-pack of storage boxes and includes the quick release base. The TracPak is not waterproof or water-tight and does not float, so each storage box features an eyelet if you choose to use a leash for added security. For enhanced organization, included are four white labels. These adhesive labels are designed to fit on the latch of each box and create an area to identify the contents inside each box using a permanent marker like a Sharpie. If you need replacements or want to have spare boxes, additional TrackPak boxes and the quick release base are also sold separately. TRACPAK QUICK RELEASE BASE: The TracPak Quick Release Base provides the foundation to mount one or two TrackPak Stackable Storage Boxes onto a single mounting point. This mount is compatible with all YakAttack MightyMounts, GearTrac, and most other factory-installed kayak accessory tracks. When attached to a track, the Quick Release Base features an array of slots, allowing for micro adjustments in each direction of the t-bolt. This should maximize compatibility by increasing the locations where the TrackPak will fit on your watercraft. If you would rather surface mount the quick release base, included are stainless steel screws for attachment on the BlackPak Pro, the deck of your kayak, or other flat surfaces. For surface mounting on anything other than the BlackPak Pro a 1/8” drill bit will be required for the install. Please use a handheld screwdriver and make sure to not overtighten the stainless screws. TRACPAK QUICK RELEASE HANDLE: Organizing several TracPaks the night before, optimizes your time spent on the water. Transporting a stack of TracPaks from home, to your vehicle, and then to your watercraft just got a lot easier. Designed for use with the TracPak Stackable Storage Box, the Quick Release Handle attaches to the lid of the TracPak and provides a quick and easy carry handle for one or multiple TracPak stackable storage boxes. The handle snaps into the Quick Release tabs on the TracPak lid the same way multiple storage boxes are attached. To remove the handle simply, depress the built-in tab on the TracPak lid and the handle will release. No extra hardware or loose parts are needed for the installation. TWO PACK HALF DEPTH TRACPAK TRAY (4X2,5X1,1X3): Sold as a two pack, these trays are a simple way to "Make It Yours" and customize your TracPak Stackable Storage Box so it fits your specific needs. From tools to tackle and anything in between, these trays provide heighten organization, making your time in the outdoors more efficient. The trays are half depth meaning they only take up half the height of the internal space of the TracPak, so a single TracPak can hold up to two trays. Included are ten Stacking Tabs. When used these Stacking Tabs create the ability for a single tray to be suspended within the TracPak leaving the bottom open for miscellaneous storage of larger items. When the TracPak is closed a suspended half-depth tray comes in contact with the underside of the lid keeping items secure in each compartment of the tray. If you are using two half-depth trays inside a single TracPak then the Stacking Tabs are not necessary. TRACPAK WITH PICPOCKET QUICKDRAW TRACK MOUNT The TracPak with PicPocket QuickDraw is a variation of the TracPak Stackable Storage Box combined with the 7.5” GridLoc PicPocket. When combined these products create an easy access storage option with a spring-loaded lid for anything from tools to tackle. The interior storage space is 7” wide x 2.25” deep. When the TracPak latch is opened, the lid pops out at a 30° angle, fully exposing the PicPocket. This works exceptionally well when the TrackPak is mounted on a vertical surface like the side of the BlackPak Pro but can also be mounted horizontally on a GearTrac. Includes the TracPak Quick Release Base and the necessary hardware to mount the TracPak to GearTrac or on the BlackPak Pro.
Related
Related
Related
Related