PX10 The versatile PX series power amplifiers lineup combines intelligent processing with high output power to meet the requirements of a vast range of sound reinforcement environments. 1000W x 2 at 8Ω / 1200W x 2 at 4Ω. 2x 1000W at 8Ω 2x 1200W at 4Ω Newly developed Class-D amplifier engine with a custom LSI Flexible onboard PEQ, crossover, filters, delay, and limiter functions Yamaha Speaker presets Utlities for safe and secure operation General specifications PX10 Sampling frequency rate Internal 48kHz A/D D/A Converters AD/DA: 24-bit linear, 128 times over sampling Total harmonic distortion 0.1% (1kHz, 10W), 0.3% (1kHz, Half power) Frequency response ±1.0dB (1W, 8Ω, 20Hz to 20kHz) S/N ratio 101dB (A-weighted, 8Ω, Gain setting = +14dBu) Crosstalk Less than -60dB (Half Power, 8Ω, 1kHz, Vol max input 150Ω shunt) Voltage Gain/Sensitivity 8Ω Volume max 32.0dB/+9.3dBu (Gain setting: 32dB), 26.0dB/+15.3dBu (Gain setting: 26dB), 37.3dB/+4dBu (Gain setting: +4dBu), 27.3dB/+14dBu (Gain setting: +14dBu) 8Ω Volume max /Power Boost mode - Maximum input voltage +24dBu Input impedance 20kΩ (Balance), 10kΩ (Unbalance) I/O Connectors Speaker output ports Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2 Line Input XLR-3-31 x2, 1/4 "PHONE(TRS) x2 Others USB 2.0 Standard-A Connector (Female) for Save/Load, Speaker preset update, Firmware update with USB memory; AC inlet x1 with AC cord clamp Indicators POWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green); Auto LED off feature Processors Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 - 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker Processor(6 band PEQ* + Limiter + Delay) Latency 1.5 msec (Analog Input to Speakers) Presets 8 user amplifier presets (Factory preset: Speaker presets for Yamaha passive speakers) Protection circuit Load protection POWER switch on/off: Output mute; Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset; DC-fault: Power Supply shutdown (NOT restored automatically) Amplifier protection Thermal: Output limiter (Restored automatically) → Output mute (Restored automatically); Over current: Output mute (Restored automatically); Over voltage: Output limiter (Restored automatically); Integrated Power Limit: Output limiter (Restored automatically) Power supply protection Thermal: Output limiter (Restored automatically) → Power supply shutdown; Over voltage: Power supply shutdown; Over current: Power supply shutdown Amplifier class Class D, Balanced output circuit (BTL) Cooling 16 step variable speed fan x 2, front to rear airflow Power requirements Depending on area of purchase; 100V 50Hz/60Hz, 120V 60Hz, 220V-240V 50Hz/60Hz *Verified as operating at rated power voltage +/- 10% voltage. Power consumption 310W (1/8 MAX power, 4Ω, Pink noise at all channels), 60W (4Ω, Idling) Dimensions W 480mm (18-7/8") H 88mm (3-7/16"): 2U D 388mm (15-2/8") Net weight 7.4 kg (16.31 lbs) Accessories USB cover, Owner's Manual, Specification sheet, AC cable (2.0m) x 1 Others USB 2.0 Standard-A Connector (Female) for Save/Load, Speaker preset update, Firmware update with USB memory; AC inlet x1 with AC cord clamp
Related
Related
Related
Related