Yoder Smokers Touch-Up Paint – Satin Black 12oz OEM Factory-Matched Finish | YS Series · S Series · Charcoal · Offset Smokers Keep your Yoder Smokers grill looking factory-fresh with this OEM touch-up paint, specifically formulated to match the satin black finish used on YS series pellet grills (2015 and newer), S series pellet grills with wifi-enabled ACS controller, charcoal grills, and offset smokers. Simply sand the affected area lightly and apply for a seamless, flawless repair. ✓ Model-Specific Repair Pages GE SERIES Refrigerator Parts & Repair Guide GE S Refrigerator Parts & Repair Guide YS480 YS640 YS1500 Wichita Cheyenne Don't see your model? Contact us and we'll help. Yoder Smokers updated their paint finish to satin in 2015. To confirm which finish your grill requires, check the metal plate on the lid — it contains your serial number and date of manufacture. S series pellet grills with the wifi-enabled ACS controller always use the satin finish. ✓ Common Symptoms Fixed Chipped or scratched cooker body paint from regular use, transport, or seasoning buildup. Faded or discoloured finish on the lid, barrel, or firebox. Surface rust spots on the cooker body where paint has worn through. ✓ Key Features & Specifications Factory-matched satin black finish. Designed for YS series (2015+), S series with ACS controller, charcoal grills, and offset smokers. 12oz aerosol spray can. OEM Yoder Smokers product. Part #46681 (satin) / cross-reference #47821. ⚠️ Pro tip: Yoder Smokers changed their paint finish to satin in 2015. If your grill was manufactured before 2015, you need the flat black finish instead. Always verify your serial number and manufacture date on the metal plate inside the lid before ordering. ✓ Buying Options OEM (Part #46681): Genuine Yoder Smokers factory touch-up paint in satin black. The exact paint used on the production line — guaranteed colour match for grills manufactured 2015 and newer. ✓ Replacement Part Numbers 46681 · 47821 ✓ Installation Tips Clean the area thoroughly and remove any loose rust or debris. Lightly sand the damaged area with fine-grit sandpaper (220 grit recommended) to create adhesion. Wipe clean and allow to dry completely. Shake the can well for at least 2 minutes. Apply in thin, even coats from 10–12 inches away. Allow each coat to dry before applying the next. For best results, apply in temperatures above 50°F (10°C).
