Ultra Start TXPT4P Replacement Remote MKYTXPT4G

Remotes And Keys Verified independent store

→

Used Ultra Start TXPT4P Replacement Remote MKYTXPT4G Programming Procedure: 1. Within 3 seconds turn the ignition ON, OFF, ON, OFF, ON.2. Press and hold the program button - parkin g lights will come on (if lights don?? come on then turn key OFF for 5 seconds and repeat step 1.3. Continue to hold the programming button. The parking lights will come on. Continue holding the programming button.4. Press the LOCK button on each 1st car remote and the # button on each 2nd car remote. The parking lights will flash each time a remote is learned.5. Release programming button and take out key. Note: Programming must be done quickly or you will be timed out. Do not pause more than one second between each remote. All remotes to be used must be programmed at the same programming session. All previously programmed remotes not reprogrammed now will be erased from stored codes. The system can learn up to four remotes including 2nd car remotes. You can program a remote as a 1st car remote in one vehicle and as a 2nd car remote in a second vehicle. Show more