New 2Way Compustar 2W9000R-FM Keyless Starter Remote VA5JR561WSS with programming instructions and battery included free. Works on these systems: RF-2W9000-SS, CM6000, CM6200 and CM6300. Programming Procedure:Important: Every remote must be coded to the system prior to performing any operations. All remotes must be coded at the same time.1. Activate the Valet/Programing mode manually by turning the ignition key on and off (between the Acc & On positions) five times within seven seconds. The vehicle's parking lights will flash once with the successful completion of this step.2. Within two seconds after cycling the ignition for the fifth time, tap the lock/panic button on 2-Way remotes or the lock button on 1-Way remotes for half a second. The parking lights will flash once to confirm the transmitter has been coded.Exiting programming: programing is a times sequence. The parking lights will flash twice signaling the end of the programming mode.Programming Multiple remotes: After the confirmation flash given in step 2, code additional remotes by pressing the lock/panic on 2-way remotes or the lock button on 1-way remotes. the parking lights will flash once confirming each additional remote. All systems can recognize up to three remotes.
