The Zaxcom RX200 is a 200 MHz wide-band, compact, battery powered ENG receiver. It has a tunable tracking front end filter for receiving any frequency in any block from 20 through 26, or 512 – 698 MHz, all while still filtering out unwanted RF.Zaxcom RX200 can output AES digital audio or analog audio at -35dB mic level, -10dB consumer level, or 0dB line level on a single TA5 connector. It’s also capable of receiving and outputting the embedded SMPTE timecode on a BNC connector also on mic, line or consumer levels, so no matter what the camera is all bases are covered. Specifications Receiver Receiver RF Channels 1 Diversity Method Antenna switching RF Modulation proprietary digital method RF Frequency Range 518 to 698 MHz RF Frequency Step 100 KHz RF Signal Bandwidth 100 KHz in ZHD 96, 200 KHz in XR, mono, and stereo modes Channel Separation 500 KHz Sensitivity -114 dBm Antenna Connector 50-ohm SMA female X 2 Receiver Audio – Analog Output X 2 Dynamic Range 116 dB Distortion 0.002% Frequency Range 20Hz to 16kHz DAC Bit-depth 24 bits Connector TA-5M Audio Output Active analog balanced Audio Output Level -35dBm (mic), -10dBm (consumer) or 0dBm (line) Receiver Audio – Digital Output Signal Format AES Balanced AES dynamic range 123dB Frequency Range 20Hz to 16kHz AES3 balanced output 32 KHz Audio Output Connector TA-5M Timecode Timecode output connector BNC Timecode output level .01VPP, .2VPP, .5VVP, .9VPP, 1.5VPP Time code output rate 23.98, 24, 25, 29.97 ND, 29.97 DF, 30 Power External Power 6 to 18 VDC (140mA @ 12VDC) Power Connector Switchcraft 760k Internal Power 4 AA Batteries Li-Ion Battery Life Up to 12 hours NiMH Battery Life Up to 8.5 hours Alkaline Battery life Up to 7 hours