Designed for F3F and F3B model gliders. Very small and very strong. This is a very small power switch designed for F3F and F3B remote controlled model gliders. With this switch your RC model can be turned on or off without you needing to access it internally. Just move a magnet over the switch, on the outside of the model, and it turns on. To turn it off just pass the magnet by the switch again. The switch has an ultra low power consumption in the off-state. The consumption is so low that the switch can be connected to a 300mAh battery for several years without discharging it. The switch has a built-in failsafe function. It remembers its state for at least 10 sec, if disconnect from the battery. It will protect the switch against power glitches caused by bad battery connections, etc. Production test All switches have been tested with 10A for 30 sec before delivery. Standby consumption is controlled and a visual inspection is made. Technical DataInput voltage range: 3v~13vUltra low dropout voltage: 40mV@11AOutput current constant: 7A @ +25C ambient temperatureOutput current burst: >20AUltra low stand-by current: 5µA (micro-ampere)Connectors: JR-typeWire: high-quality 0.5mm2 / AWG 20Weight including cables: 4.3 grams / 0.15oz.Length including cables: 18 cm / 7 inDimensions: 25 x 8 x 5 mm / 0.98 x 0.31 x 0.20 inOperational temperature range: -40C to +85C Price includesMagnet and Stickers Manual Magnetic-Switch
