Description The Zoom is a twin rectangular recessed downlight with two fixed GU10 fittings set into a matt black cast aluminium frame. The rectangular bezel measures 170mm × 90mm with a 36mm recess depth, and each of the two light apertures houses a separate GU10 socket rated up to 50W. The IP65 rating protects against dust ingress and low-pressure water jets, making the fitting suitable for bathrooms, shower rooms and covered outdoor areas. Designed for installation into plasterboard ceilings or timber joists where a dual-source downlight is needed, the Zoom provides two independently controllable light points within a single cutout. This suits kitchen worktop task lighting, bathroom mirror zones, hallway runs and retail display lighting where higher lumen output or directional flexibility is needed compared to a single-source downlight. The fixed apertures point directly downward with no tilt adjustment, delivering a consistent wash of light beneath the fitting. The cast aluminium construction disperses heat efficiently across the rectangular frame, allowing the fitting to run two 50W halogen GU10s without overheating (though most installations now pair it with LED GU10s at 5-7W each for lower running costs). The matt black finish is powder-coated rather than painted, resisting chips and wear in high-traffic areas. The rectangular form factor integrates cleanly into linear ceiling layouts and pairs well with other rectilinear architectural details. Specification Height 3.6cm Length 17cm Width 9cm Finish Black Construction Aluminium IP Rating IP65 Voltage AC 220-240 Bulb Base GU10 Wattage 50 Warranty 2 Year Guarantee Downloads Product Manual Frequently Asked Can this be used in a bathroom? Yes. The IP65 rating protects against water jets and steam, making it suitable for bathroom zones 1 and 2 (outside the shower enclosure itself). It must be installed by a qualified electrician following current UK wiring regulations for bathroom lighting. What bulbs does it take? The Zoom takes two standard GU10 bulbs, each rated up to 50W maximum. Most users fit LED GU10s at 5-7W and 3000K for lower energy consumption and longer bulb life. Bulbs are sold separately. What cutout size is needed? The rectangular bezel measures 170mm × 90mm. The exact cutout dimensions and recess depth requirements are detailed in the installation manual linked in the Downloads tab above. Can the light direction be adjusted? No. The Zoom is a fixed downlight — both GU10 apertures point directly downward with no tilt or rotation adjustment. For adjustable twin downlights, see the tilting variants in the Maytoni Zoom range.
Related
Related
Related
Related