sE Electronics [SE Limited-Quantity Promo!] DM1 DYNAMITE (+28dB Preamp for Passive Microphones) (SE Electronics)

Ikebe Musical Instruments Store Verified independent store

→

★Explosive level for passive microphones Your microphone needs more gain—and not every preamp will do the trick. The DM1 DYNAMITE is an incredibly slim active in-line preamp that s its between your microphone and the mic preamp, providing +28dB of clean, transparent gain for any passive microphone (dynamic or ribbon). Thanks to its sophisticated Class A design and specially selected, high-quality FETs, the DM1's output impedance is extremely low and nearly half the noise of other products on the market. Additionally, a dedicated buffer amplifier provides a constant 28dB of gain, regardless of the connected load. The DM1 is the perfect tool for boosting signals from passive microphones, delivering significantly increased level to the preamp without adding noise or coloration, while minimizing potential interference. Its lowest output impedance in its class also makes it less susceptible to RF interference, buzz, and hum, even over long cable runs. The slim yet heavy-duty metal chassis, robust construction and high manufacturing standards ensure reliability even on demanding stages. +28dB clean and stable gain, independent of load. Designed for neutral and balanced sound quality. The best tool for boosting passive microphone signals. Gain remains consistent regardless of connected load. Provides significantly improved level to microphone preamps for proper gain staging. Refined Class A electronics - Refined Class A electronics and high-grade FETs achieve ultra-low noise. - Transformerless design that faithfully reproduces the original sound quality of the source. - Lowest noise in its class. Dedicated output buffer amplifier: Provides +28dB of output power regardless of load impedance or cable length. Extremely low output impedance. Reduces the effects of RF interference, buzz, hum, etc., even with long cable runs. Slim, sturdy metal housing with premium finish. Effectively rejects all electrical interference and noise. High-quality finish and gold-plated XLR connectors ensure reliable signal connection. Slim design makes it easy to set up in the studio or on stage. Specifications: Frequency range: 10 Hz - 120,000 Hz (-0.3 dB) Gain: 28 dB (1 kΩ load) Maximum output level (0.5% THD): 8.3 dBV (2.6 V) Output noise level: 9 μV (JIS-A) Operating power: 48V phantom power (IEC 61938 compliant) Impedance: 135 ohms Recommended load impedance: 1 kΩ or more Current consumption: 3.0 mA Connector: XLR 3-pin Dimensions: 19 mm (diameter) x 95.5 mm (length)・Body weight: 80 g Specifications are subject to change without notice. ※please note※・DM1 is designed for use with passive microphones (dynamic microphones and ribbon microphones). It cannot be used with microphones that require phantom power (condenser microphones and active ribbon microphones). - To operate the DM1, a separate preamp/mixer/audio interface that can supply 48V phantom power is required. Show more