Overview This Dante 2CH XLR Input Adapter is an audio transmitter based on the Dante Ultimo 2x2 solution. It converts two-channel balanced/unbalanced XLR analog audio into Dante 2CH digital audio, then transmits the audio to the receiving end through network (Dante). Analog audio input supports 5-level sensitivity adjustment. The adapter supports local USB-C port power supply and PoE function. Features Two-channel XLR analog audio to Dante 2CH digital audio Balanced/unbalanced XLR analog audio input Dante audio sampling rate supports 44.1/48/88.2/96KHz@24bit Dante audio delay supports 1/2/5ms (configurable) Analog audio input supports 5-level sensitivity adjustment (+24dBu, +4dBu, 0dBu, 0dBv, -10dBv) Supports local USB-C port power supply and PoE function (Class 0 802.3af PoE) Compact design for easy and flexible installation Specifications Technical: Input: Two-channel balanced/unbalanced XLR analog audio Output: Dante 2CH digital audio Control Method: Dante Controller Video Network Bandwidth: 100M Audio Latency: Configurable Dante® device latency (Supports 1, 2 or 5ms configurable using Dante® Controller) Audio Formats: XLR IN [Analog audio input, Balanced/unbalanced 2CH, Max input level +24dBu] DANTE OUT [Digital audio output, PCM 2CH 44.1K-96KHz 16/24bit] Transmission Distance: 100m (CAT6/6A/7) ESD Protection: IEC 61000-4-2: ±8kV (Air-gap discharge) & ±4kV (Contact discharge) Audio Parameters: XLR Analog Audio In Input Impedance: 20k Ohm balanced, 10k Ohm unbalanced Line Input Level (Maximum): +24dBu (12.28Vrms) @balanced audio, +18dBu (6.15Vrms) @unbalanced audio Frequency Response: 20Hz to 20kHz (-/+0.5dB) Dynamic Range: >100dB@0dBu, 1kHzA-weighted Audio S/N Ratio: >100dB@0dBu, 1kHzA-weighted Audio THD+N: < 0.01% at +4dBu, 1KHz Audio Output Sync Delay:
Related
Related
Related
Related