Overview This Dante 2CH XLR Output Adapter is an audio converter based on the Dante Ultimo 2x2 solution. It converts Dante 2CH digital audio into two channel balanced/unbalanced XLR analog audio. Analog audio output supports 5-level gain adjustment. The adapter supports local USB-C port power supply and PoE function. Features Dante 2CH digital audio to two-channel XLR analog audio Balanced/unbalanced XLR analog audio output Dante audio sampling rate supports 44.1/48/88.2/96KHz@24bit Dante audio delay supports 1/2/5ms (configurable) Analog audio output supports 5-level gain adjustment (+18dBu, +4dBu, 0dBu, 0dBv, -10dBv) Supports local USB-C port power supply and PoE function (Class 0 802.3af PoE) Compact design for easy and flexible installation Specifications Technical: Input: Dante 2CH digital audio Output: Two-channel balanced/unbalanced XLR analog audio Control Method: Dante Controller Video Network Bandwidth: 100M Audio Latency: Configurable Dante device latency (Supports 1, 2 or 5ms configurable using Dante Controller) Audio Formats: DANTE IN [Digital audio input, PCM 2CH 44.1K-96KHz 16/24bit] XLR OUT [Analog audio output, Balanced/unbalanced 2CH, Max input level +24dBu] Transmission Distance: 100m (CAT6/6A/7) ESD Protection: IEC 61000-4-2: ±8kV (Air-gap discharge) & ±4kV (Contact discharge) Audio Parameters: XLR Analog Audio Out Output Impedance: 600 Ohm balanced, 300 Ohm unbalanced Line Output Level (Maximum): +18dBu (6.15Vrms) @balanced audio, +12dBu (3.08Vrms) @unbalanced audio Frequency Response: 20Hz to 20kHz (-/+0.5dB) Dynamic Range: >100dB@0dBu, 1kHzA-weighted Audio S/N Ratio: >100dB@0dBu, 1kHzA-weighted Audio THD+N: < 0.01% at +4dBu, 1KHz Audio Output Sync Delay:
