Main feaures 20 channel GPS High sensitivity Vario (unique Dual technology) 40 hours power supply 145 hours flight storage USB for charge / speed / PC Temperature sensor G-force sensor to 8G Big buttons, Big display Very user friendly software High resistant case Modular technology - repair by yourself G-force display 15 Record 15 times per second: 1. Selected axis display (1 or 3 axis)2. Free memory in minutes3. Altimeter4. Vario5. Max G-force from the last 5 sec.6. The line chart show 10 sec. G-force display 60 Record 60 times per second: 1. Free memory in minutes (a recording in this mode is not possible)2. Date3. Time4. The full line chart show 5 sec.5. Selected axis display (1 or 3 axis) G-forces analysis Axis recording with the Aircotec TN Complete analysis software (software and license are included). MAP display 1. Groundspeed (SOG)2. Altiude3. Climp/sink rate4. Upwind / downwind5. Speed Over Ground (SOG)6. Flying arena zoom7. LOW BATT symbol8. Pilot position9. CTR Airspace10. Distance to chosen WPT, Mark or to the launch11. Local time12. Show track13. Position Mark14. WPT Cylinder depiction15. Waypoint symbol16. TAS (True Air Speed) - only with spped probe connected17. Speed distribution curve18. Windspeed XC-Trainer-3DG > Thermal & Windcurve display 1. Windspeed2. Groundspeed (SOG)3. Altiude4. Great digital Vario , climp/sink rate5. Vario averager for the last 10,20 or 30sec6. Speed discription curve ( Aircotec Patent)7. Visualised thermal (Aircotec Patent)8. Distance to chosen Takeoff, Way point or MARK9. Elapsed time flight10. Direction to chosen Takeoff, Way point or MARK (track off)11. Wind direction VARIO diplay 1. Windspeed 2. Groundspeed (SOG) 3. Direction to chosen Takeoff, Way point or MARK (track off) 4. Gleide angle 5. Altiude 6. Digital Vario -99.0m/s bis +99.0m/s 7. Alt 0 8. Vario averager for the last 10,20 or 30sec 9. Distance to chosen Takeoff, Way point or MARK 10. Local time 11. Analog Vario o-5m/S und 5-9m/S 12. Wind direction Barogram/Temp display 1. Vario Volume adjusts in four steps2. Horizontal line 500m above the pilot3. Line des adiabaischen TEMP (-1°C/100m)4. Pilot position5. Barogramm from the last 10 minutes to +/-500m relative to the pilot6. Thermogram from the last 10 minutes to +/-6°C rel. to Pilot7. Horizontal line 500m beneath the pilot8. Current temperature9. Local time10. Vario averager 30s Logbook: Year overview Grouped into 12 months vertical. 31 days to the horizontal line. Pro Flight 1 pixel vertical. 1-5 flights visible. 1. Current date2. Total stored flights3. Vertical lines show the flights of the day (Example: 5 flights)4. Year5. Month Logbook: flight overview 1. Date2. Flight number3. Flight time4. Max. speed over ground5. Flight overview6. Scale from the flight (for example 640x640km)7. Bird eye view (automatic scale from the flight)8. Max altidute9. Start time Logbook: flight detail 1. Date2. Start time3. Landing time4. Flight time5. Max. altidute / max. temperature6. Max. climb rate and max. sink rate7. Flight overview8. Max. speed over ground9. Max. true air speed (only with speed probe connected)10. Menu: Delete the flight11. Menu: Send the flight to PC12. Menu: Replay the flight on XCT13. Menu: Exit Technical Specifications GPS receiver:20 channel parallel, 2D/3D position (WGS 84),altitude, speed, direction, internal aerial. Altitude:-1000m to +8200m, resolution 1m. At launch the GPS module provides an automatic altitude setting (AMSL). Vario:Digital indication from –90.0m/s to +90.0m/s Analogue indication from 0 to 5m/s and from 5 to 9,5 m/s. Acoustic signal for climbing initiates at +0.1m/s. This may be switched off. Acoustic signal for sink can be set to initiate between –0.1m/s and –5m/s. Settings in MENU/SETTINGS/VARIO From –5m/s a sink alarm will be heard regardless of settings. G-force memory:full record about 14 hour in 1 axis mode. 15 or 60 times per second, 1 or 3 axis Temperature:The sensor is placed on the right hand side of the instrument. It measures in centigrade from –25 to +75 degrees, resolution 0.1 degrees Clock:Flight recording in UTC. Display shows local time and elapsed time since launch. Memory:Flight data: 145 hours every second, 224 waypoints, 10 routes Data transfer:USB for charge, speed, PC / infrared Power supply:Rechargeable Li-Ion 3.7V/1800mAh. Operating time per charging app. 40 hours. The instrument is equipped with an “intellicharge” system. To protect the Li-Ion battery the XC-Trainer will shut itself down when before the battery is completely flat, saving all flight data beforehand. Speed (Only with speed sensor connected):0 – 160km/h Total-Energy-Compensation (TEC) 0 – 90% Dimensions:137 x 66 x 28 mm, weight including battery 150g. Firmware Flight Recorder:The integrated flight recorder saves position, altitude, clinb/sinkrate, SOG, heading and temperature every second for up to 145 hours Waypoints:224 waypoints sorted in 14 lists with 16 waypoints each Routes:10 routes each with up to 16 turnpoints Cylinder depiction CTR Airspace MAP Display:Groundspeed (SOG), Altiude, Climp/sink rate, upwind / downwind, SOG, LOW BATT symbol, Pilot position, CTR Airspace, Distance to chosen WPT, Mark or to the launch, Local time, Show track, Position Mark, WPT Cylinder depiction, Waypoint, TAS, Speed distribution curve, Windspeed Thermal & Windcurve display:Windspeed, SOG, Altiude, Vario, Vario averager, Speed discription curve, Visualised thermal, Distance to chosen Takeoff, Way point or MARK, Elapsed time flight, Direction to chosen Takeoff, Way point or MARK, Wind direction VARIO diplay: Windspeed, SOG, Direction to chosen Takeoff, Way point or MARK, Gleide angle, Altiude, digital and analog Vario, Alt 0, Vario averager, Distance to chosen Takeoff, Way point or MARK, Local time, Wind direction Barogram/Temp display:Horizontal line 500m above the pilot, Line des adiabaischen TEMP (-1°C/100m), Pilot position, Barogramm, Thermogram, Horizontal line 500m beneath the pilot, temperature, Local time, Vario averager 30s G-force display:display selected axis, free memory in minutes, Altimeter, Vario, Max. G-force from the last 5 sec., line chart, full line chart, Date, Time Aircotec XC-Trainer Series Comparison Table See Aircotec's XC-Trainer series comparison table on the Aircotec website. Manual Download the latest version of the XC-Trainer-3DG Manual from the Aircotec website. Software Download the latest Aircotec software for the XC-Trainer-3DG from the Aircotec website. What's Included? The XC-Trainer-3DG comes with the following as standard: Charger 100-230 AC (European plug) USB cable Carry bag TN-Complete software, with license CD The standard package does not include a PG or HG mount. Optional Extras Aircotec XC-BH - Paragliding Leg Mount for XC Trainer Aircotec XC-GZH - Paragliding Harness Mount for XC Trainer Aircotec XC-DH - Hang Gliding Mount for XC Trainer
