The Aircotec XC-TrainerDual Alti-Vario-GPS is a flight instrument for paragliding, paramotoring and hang gliding with a 20 channel GPS and two Vario sensors (Dual sensors) with an extra sensitive sensor for increased sensitivity. It also features modular technology, so is designed to be repairable by yourself. The new generation... Vario Altimeter Data logger 20 channel GPS The new challenge... Flight area visualisation 10 position marks Track / bearing Speed / course With simple handling... Thermal visualisation Thermal centring support Wind direction Wind speed ...and top technology! Time Barogram Temperature gradient Average climb rate The Aircotec XC Trainer Dual has two sensors (Dual sensors) with an extra sensitive sensor for increased sensitivity. Easy To Repair Modular Hi-Tech Flight Instruments Modular technology. Repairable by yourself... NEW Click-Switch Technology All elements screwed No soldering No glue required Technical Specifications Here below are the technical specifications for the Aircotec XC Trainer Dual... Altitude -1000m to +8200m Resolution 0,1m At launch the GPS module provides an automatic altitude setting (AMSL) Vario Digital indication from –25.5m/s to +25.5m/s Analogue indication from 0 to 5m/s and from 5 to 9,5 m/s. Acoustic signal for climbing initiates at +0.1m/s. This may be switched off Acoustic signal for sink can be set to initiate between –0.1m/s and –5m/s Settings in MENU/SETTINGS/VARIO From –5m/s a sink alarm will be heard regardless of settings Speed* 0 – 160km/h Total-Energy-Compensation (TEC) 0 – 90% Only with speed sensor connected* *Speed sensor is not included. Temperature The sensor is placed on the right hand side of the instrument. The sensor measures in centigrade from –25 to +75 degrees Resolution 0.1 degrees GPS receiver 20 channel parallel 2D / 3D position (WGS84) Altitude Speed Direction Internal aerial Data Transfer protocols USB Cable Infrared Clock Flight recording in UTC Display shows local time and elapsed time since launch Memory Flight data: 1MB flash, 184 in the circular buffer Waypoints: 4KB flash for 224 waypoints Power supply Rechargeable Li-Ion 3.7V/1200mAh Operating time per charging approx. 15 hours Power consumption 75 mA The instrument is equipped with an “intellicharge” system. To protect the Li-Ion battery the XC-Trainer will shut itself down when before the battery is completely flat, saving all flight data beforehand. Dimensions & Weight Dimensions: 137mm x 66mm x 28mm Weight (including battery): 150g Upper Display Description Ratio left/right thermaling Wind direction Windspeed Groundspeed (SOG) Altitude Climb/sink rate Acoustic signal volume Heading (COG) Speed distribution curve beneath the wind rose and the SOG bar Lower Display Description LOW BATT symbol TAS (TRUE AIRSPEED) Resolution Pilot position Narrow heading indicator Position Mark symbol Waypoint symbol WPT cylinder depiction Distance to chosen WPT, MARK or to the launch Flashing indication pointing to the chosen WPT or MARK Local time What's Included? The Aircotec XC-Trainer Dual comes with the following as standard: USB cable Charger 100-230 AC (European plug) Carry bag TN-Complete software The standard package does not include a PG or HG mount. See the Optional Extras below. Optional Extras Aircotec XC-BH - Paragliding Leg Mount for XC Trainer Aircotec XC-GZH - Paragliding Harness Mount for XC Trainer Aircotec XC-DH - Hang Gliding Mount for XC Trainer
