Ensure compliance with NYC Fire Code by clearly identifying buildings with sprinkler protection limited to the basement. This sign helps FDNY personnel quickly assess fire protection coverage during emergencies, improving response time and safety in partially sprinklered structures. Dimensions: 10" x 12" Materials: .02in Reflective Aluminum What This Sign is For: This sign is used to clearly indicate that a building’s automatic sprinkler system is limited to the basement level only and does not extend throughout the entire structure. It provides critical information to emergency responders about the scope and limitations of fire protection coverage within the building. Legal Requirement Explained: Under the NYC Fire Code (FC §901 and §903), buildings must provide clear identification of fire protection systems, including any partial sprinkler coverage. When sprinkler systems are not installed throughout the building, signage is required to communicate these limitations so the FDNY can make informed decisions during fire suppression operations. Who is Required to Post This Sign:- Buildings where automatic sprinklers are installed only in the basement- Older or partially retrofitted buildings with limited fire protection systems- Commercial, mixed-use, and multifamily residential buildings with non-full sprinkler coverage- Any structure where system coverage differs by floor or area Where We Recommend This Sign Be Posted:- At the main building entrance or lobby area- Near the Fire Department Connection (FDC), if applicable- Inside or near the sprinkler control or riser room- In a location where it is clearly visible to FDNY personnel upon arrival Unacceptable Locations to Post This Sign:- Inside private offices or restricted areas not accessible to responders- Behind doors, furniture, or equipment that obstruct visibility- In areas with poor lighting or low visibility- On temporary surfaces where signage may be removed or damaged- Any location not immediately visible upon building entry or system access Recommended Height / Installation Requirements:- Install at eye level (typically 48”–60” above finished floor)- Use permanent, durable materials suitable for the environment- Ensure high contrast lettering for readability- Must be firmly mounted and not easily removable- If installed near exterior elements, ensure weather-resistant construction Disclaimer: The information provided is based on commonly referenced NYC Fire Code guidelines and industry standards (including FDNY and NFPA practices). Specific requirements may vary depending on building classification, occupancy, and jurisdictional updates. Always consult a licensed professional or local authority having jurisdiction (AHJ) to confirm compliance for your specific property.
