Important Update: Bambu Lab Products Due to high demand, Bambu Lab products may have slightly longer lead times. We are diligently working with the vendor to ensure timely delivery. For the latest information on current stock, please contact one of our STEM Experts at 800.985.7836. PLEASE NOTE: Any filaments on this page that you cannot select or are listed as "Out of Stock" are currently on backorder. Due to the current Chinese New Year being observed by our partners at Bambu Lab please expect extended lead times for any "Out of Stock" filaments. Bambu Lab PLA Aero Additional Resources: Technical Datasheet, Material Safety Sheet, Filament RoHS Highlights: Main Features Specialized for 3D RC Planes Printing Low Density and Light Weight Tough with Good Impact Resistance Matte Finish For Easy Coloring Comes with Basic Reusable Spool Diameter: 1.75mm +/- 0.03mm Bambu PLA Aero achieves low density and light weight by foaming at high temperatures during printing and creating small holes inside the prints. It's the perfect choice for light-weight and energy-saving prints, including unmanned aerial vehicles (UAVs), aerodynamic models, and gliders. Foaming PLA materials (PLA Aero) have high requirements for material drying and parameter settings. Please carefully read Instructions for printing aircraft model with foaming PLA (PLA Aero) before starting the printing process. Bambu PLA Aero has almost the same filament density as regular PLA, while the prints density is only 50% to 80%. RFID for Intelligent Printing All printing parameters are embedded in RFID, which can be read through Bambu Lab's AMS (Automatic Material System). Load and print! No more tedious setting steps. Technical Specifications: Recommended Not Recommended Build Plate Cool Plate SuperTack, Smooth PEI Plate, Textured PEI Plate / Hotend Hotend with Hardened Steel Nozzle 0.4 mm Hotend with Stainless Steel Nozzle 0.4 mm Hotend with Hardened Steel Nozzle 0.6 mm / 0.8 mm Hotend with Stainless Steel Nozzle 0.2 mm Glue Bambu Liquid GlueGlue Stick / Recommended Printing Settings Drying Settings (Blast Drying Oven) 55 °C，8 h Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant) Nozzle Temperature 220 - 260 °C Bed Temperature (with Glue) 35 - 45 °C Printing Speed < 180 mm/s Physical Properties Density 1.21 g/cm³ Vicat Softening Temperature 54 °C Heat Deflection Temperature 53 °C Melting Temperature 153 °C Melt Index 7.7 ± 0.6 g/10 min Mechanical Properties Tensile Strength 24 ± 2 MPa Breaking Elongation Rate 2.6 ± 0.7 % Bending Modulus 1690 ± 120 MPa Bending Strength 45 ± 4 MPa Impact Strength 28.8 ± 1.3 kJ/m²
