Bambu Lab PLA Aero Bambu PLA Aero achieves low density and light weight by foaming at high temperatures during printing and creating small holes inside the prints. It's the perfect choice for light-weight and energy-saving prints, including unmanned aerial vehicles (UAVs), aerodynamic models, and gliders. Foaming PLA materials (PLA Aero) have high requirements for material drying and parameter settings. Please carefully read Instructions for printing aircraft model with foaming PLA (PLA Aero) before starting the printing process. Product Features Specialized for 3D RC Planes Printing Low Density and Light Weight Tough with Good Impact Resistance Matte Finish For Easy Coloring Comes with Basic Reusable Spool Diameter: 1.75mm +/- 0.03mm Cautions for Use Recommended to dry out before use AMS Compatible Low Density and Light Weight Bambu PLA Aero has almost the same filament density as regular PLA, while the prints density is only 50% to 80%. Controllable Model Density Achieve lower density of the prints by increasing printing temperature and lowering flow rate. RFID for Intelligent Printing All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps. • Drying conditions: 55℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI.
