A premium quality, waterborne alkyd paint that offers a full line of durable high-end finishes ideal for doors, trim, and cabinetry Features Exceptional application and feel Outstanding coverage and hide Cures to a hard, furniture-quality finish Tinted with Benjamin Moore’s proprietary waterborne colourants Low VOC even after tinting Available in thousands of colours Resin Type: Water Reducible Alkyd USE A premium quality, inter waterborne alkyd enamel coating that dries to a smooth, hard finish. Advance provides a finish that is equal to the best solvent-thinned alkyd finishes. Recommended for properly primed interior surfaces of wood, cured plaster, wallboard, metal, and masonry. Ideal for new and previously painted interior trim, doors, walls, ceilings, and furniture COVERAGE Quart (946 millilitres)- One coat of approximately 100 square feet of wall space Gallon (3.79 litres)- One coat of approximately 400 square feet of wall space *Coverage may vary depending on the surface porosity and texture* SURFACE PREP Surfaces must be clean, dry, and free of grease, wax, dust, mildew, rust, and loose and scaling paint. Glossy surfaces should be dulled New plaster and masonry must be thoroughly cured before priming PRIMING Advance can be applied over an oil or latex primer Ask about special purpose primers for wood, drywall substrates, plaster, masonry, and metal surfaces or if the surface to be painted is stained, smoke damaged, or very slick Certain deep custom colours may require a deep base primer APPLICATION Use in a well-ventilated area Do not apply when air and surface temperatures are below 10°C (50°F) Stir thoroughly before and during use; Apply 2 coats This product can be applied by brush, roller, and spray Keep container closed when not in use Keep out of reach of children It is recommended that anyone who is applying the product or present during application of this product, especially those who are asthmatic, follow the manufacturer's safety precautions It is recommended that pregnant women are not present when product is being applied and drying DRYING Dries to touch in 4-6 hours; allow 16 hours to dry before sanding and applying second coat Advance’s full hardness and adhesion develops over time Do not expose to heavy abrasion or return shelves/table tops to service for at least 3-5 days to prevent damage to the finish Humidity and temperature may prolong dry, recoat, and cure times CLEAN UP & STORAGE Clean up with soap and warm water; wash thoroughly after handling Brushes and rollers should be given a final rinse with mineral spirits to remove residual alkyd Spray equipment should be given a final rinse with mineral spirits to prevent rusting In case of spillage, absorb with inert material and dispose of in accordance with local regulations When storing, tightly close container and store upside down Store in a well-ventilated area Do not store near heat, sparks, open flame, or other sources of ignition Protect from freezing Use completely or dispose of properly SAFETY & TECHNICAL DATA SHEETS Pearl Semi-Gloss High Gloss Safety Data Sheet-White (K792-01) Safety Data Sheet-Base 1 (K793-01) Safety Data Sheet-Base 1 (F794-01) Safety Data Sheet-Base 1 (K792-1X) Safety Data Sheet-Base 1 (K793-1X) Safety Data Sheet-Base 1 (F794-1X) Safety Data Sheet-Base 2 (K792-2X) Safety Data Sheet-Base 1 (K793-2X) Safety Data Sheet-Base 1 (F794-2X) Safety Data Sheet-Base 3 (K792-3X) Safety Data Sheet-Base 1 (K793-3X) Safety Data Sheet-Base 1 (F794-3X) Safety Data Sheet-Base 4 (K792-4X) Safety Data Sheet-Base 1 (K793-4X) Safety Data Sheet-Base 1 (F794-4X) Technical Data Sheet-Pearl (K792) Technical Data Sheet-Semi-Gloss (K793) Technical Data Sheet- High Gloss (F794)
