The Beat-Sonic CS10B is a plug-and-play front camera interface that adds a front-facing camera view to your factory Toyota screen - working alongside your existing backup camera with no modifications to the factory harness. Ideal for vehicles with front spoilers, lowered suspension, or anyone who parks in tight spaces and needs to see what's ahead. Note: this kit does not include a front camera. The camera must be purchased separately. We recommend the Beat-Sonic BCAM11 (black, front grille mounting) Beat-Sonic BCAM13 (black, flat type mounting) or Beat-Sonic BCAM10W (white, front license plate mounting). Professional local installation available in La Mirada, Southern California. Contact us at [email protected] to book. How it works The CS10B integrates between your aftermarket front camera and your factory Toyota infotainment system. Press the included OE-design selector switch - which fits cleanly into any vacant switch blank in your dash - to display the front camera view on your factory screen. The front camera can also be programmed to activate automatically at speeds under 9mph, making slow-speed front parking effortless. A built-in programmable timer controls how long the front camera view stays on screen after the button is pressed. Choose from 5, 10, 15, or 20 seconds, or set it to push on / push off for manual control. When you shift into reverse, the backup camera always takes priority automatically. Note for factory navigation equipped models: the navigation cursor will temporarily pause while the CS10B is active. Your current position will re-calibrate and the cursor will resume once the front camera view is dismissed. Key features Front and rear camera switching - toggle between front camera, rear camera, and factory screen at the press of a button Auto-activation under 9mph - front camera can be programmed to display automatically at low speeds for front parking assist Programmable display timer - set front camera view to display for 5, 10, 15, or 20 seconds, or use push on / push off mode Backup camera always takes priority - reverse camera displays automatically when reverse gear is engaged, even if front camera is active OE-design selector switch with white LED - fits cleanly into factory dash switch blank for a factory-integrated look Plug-and-play installation - no cutting, no splicing, no permanent modifications to the factory harness Compatible with factory navigation - navigation resumes automatically after front camera view is dismissed Specifications Voltage: DC 11V to 15V Current consumption: 50mA or less Dimensions: 40 x 25 x 57mm Weight: 55g Only compatible with CVBS cameras Compatible vehicles The Beat-Sonic CS10B is compatible with the following Toyota models: Show all compatible vehicles ▼ Make Model Years Notes Toyota 4Runner 2020-2024 Toyota Avalon 2019-2022 Toyota Camry 2018-2024 Not compatible with panoramic camera Toyota Corolla 2019-2022 Toyota Highlander 2020-2022 Not compatible with panoramic view equipped models Toyota Prius 2020-2022 Compatible with 7" screen and navigation only Toyota RAV4 2019-2022 Not compatible with panoramic view equipped models Toyota Sequoia 2020-2022 Toyota Sienna 2018-2020 Toyota Sienna 2021-2024 Not compatible with 360 or Bird's Eye View camera Toyota Tacoma 2020-2023 Not compatible with panoramic view equipped models Toyota Tundra 2020-2021 Not compatible with panoramic view equipped models Not sure if this fits your vehicle? Email [email protected] with your year, make, and model before purchasing. Recommended front cameras The CS10B does not include a front camera. We recommend the following Beat-Sonic cameras for use with this kit: BCAM11 - black, front grille mounting type, for standard factory front grille equipped Toyota models BCAM13 - black, front flat mounting type BCAM10W - white, front license plate mounting type, for standard factory front grille equipped Toyota models Frequently asked questions Does this kit include a front camera?No. The CS10B is the interface only. A front camera must be purchased separately. We recommend the Beat-Sonic BCAM11, BCAM13 or BCAM10W. Will my backup camera still work normally?Yes. The backup camera functions exactly as before. When you shift into reverse, the backup camera always takes priority and displays automatically regardless of what is on screen. Can I view the front camera while driving at normal speeds?Yes. Press the selector switch at any time to display the front camera view. The auto-activation feature only applies at speeds under 9mph and is programmable. Will this affect my factory navigation?The navigation cursor will briefly pause while the CS10B is active. Your position will re-calibrate and the cursor will resume as normal once the front camera view is dismissed. Will this void my warranty?The CS10B uses plug-and-play connectors and does not permanently modify the factory harness. It is fully reversible. Does this ship to Canada or internationally?Yes. We ship to Canada and Mexico.
Related
Related
Related
Related