The discs bond down for good. The dish lifts off whenever you want. The Essential Adhesive Kit - Mini Speedmount pairs VHB Adhesive-Backed Magnet Mounting Discs with our Rubber-Coated Magnet Set. The discs create a magnetic mounting point on roofs a magnet alone will not hold. The mount drops on, holds hard, and lifts off in seconds. Built for RV owners, van builders, and travelers who want a drill-free install that stays put at speed and still gives them their roof back. Manufactured using industrial-grade injection molding, the Mini Speedmount is extremely compact at only 1.8” in height and protects the Starlink Mini from all sides. It is designed to work seamlessly with the Starlink kickstand or the pole mount, giving you full flexibility in how you use your Mini. Here is how this kit works. The mounting discs bond to your roof with 3M industrial-strength VHB adhesive. That bond is permanent, so mark your placement and get it right the first time. The discs turn the surface into a magnetic landing zone. The Rubber-Coated Magnets then sit on top of the discs and grip that zone, safety tested to 120 mph. The magnets are the part that comes off. Take the dish down for storage, service, a low garage, or winter layup, then put it back in seconds with no tools and no adhesive to replace. On bare or painted steel you can skip the discs and set the magnets straight onto the roof. Use the discs for fiberglass, aluminum, rubber roofing, gel coat, and composite where a magnet has nothing to grab. For glass, use our Heavy Duty Suction Cups. TRIO-Grade Features: Safety tested up to 120 mph No drill Snowmelt protection Heat-transfer optimization Signal performance prioritization What’s Inside the Kit Mini Speedmount A sturdy, stylish, ultra-low-profile mounting solution for Starlink Mini. Fully injection-molded for maximum durabilityOnly 1.8” tall once installedSurrounds and protects the Starlink Mini on all sidesAllows use of Starlink’s kickstand and pole mountSimple 2-piece assembly with stainless steel bolts and nylon locknutsAvailable in White or Black VHB Adhesive-Backed Magnet Mounting Discs Turn a non-magnetic roof into a magnetic mounting point. Weatherproof steel discs backed with 3M industrial-strength VHB adhesiveBonds to fiberglass, aluminum, rubber roofing, painted steel, and gel coatPermanent bond once cured, so confirm your placement before pressing downHolds through vibration, weather, and highway speedsLow-profile and near invisible once the mount is off Rubber-Coated Magnet Set Serious holding force with a paint-safe grip. High holding force suitable for highway travel when properly placedSits on top of the mounting discs, or straight onto a bare or painted steel roofRubber-coated to protect your vehicle’s finishDrops on and lifts off in seconds, no tools requiredIdeal for vans, trucks, SUVs, and off-road builds Mini 12V DC Power Cable Powers the Starlink Mini directly from your vehicle. 10 ft cable with a standard 12V cigarette lighter plugMore efficient than running an inverterPlug-and-play, ideal for overlanding, long travel days, and remote work 4.5 mm Polycarbonate Cover Hard top-side protection for the dish. 4.5 mm polycarbonate (Lexan) constructionShields the Starlink Mini from road debris, branches, and weatherInstalls and removes in secondsKeeps the low-profile look of the Speedmount intact For a detailed walkthrough, see our full TRIO Mini Speedmount installation guide.
