The Eton is an unfinished oak FD30 fire door in a simple, chic four-panel shaker design. Supplied ready to finish, it gives 30 minutes of certified fire protection. About the Eton Oak Fire Door The Eton keeps to a clean shaker look: four straight-cut panels, with a slight size difference between the two pairs that adds a little character to the plainness. Supplied unfinished, it lets you finish the oak to your own tone. It is made by Deanta, one of the established fire-door manufacturers we range. An oak veneer over a solid fire core Like every genuine fire door, the Eton is not solid oak. It is built around a solid, fire-resisting core, faced with an oak veneer and finished with oak lippings. The core is what delivers the fire performance, while the oak face brings the natural grain and warmth of an oak door. Because the face is a natural veneer, no two doors look exactly alike. FD30 fire protection, third-party certified The Eton is rated FD30, tested and certified to resist the spread of fire for up to 30 minutes, and it is third-party certified under the BM TRADA Q-Mark scheme, the recognised independent assurance for fire doors. A fire door only performs to its rating as part of a complete, fitted set, so it should hang in a suitable fire-rated frame or lining, on the correct fire-rated hinges, with intumescent strips and smoke seals around the leaf. FD30 suits most homes; where 60 minutes is needed, see our FD60 fire doors. Finishing & Care The Eton is supplied unfinished and lightly sanded, so it must be treated before it goes into use. Seal every face and every edge, including the top and bottom, with a suitable hardwax oil from our Treatex or Osmo range, and treat the hinge, latch and handle cut-outs and any trimmed edges as you fit. Up to 30mm in total can be taken off the width and the height for a clean fit. An unfinished door left untreated will not wear well, so this first finish matters and should be refreshed periodically. Our internal door treatments guide explains how. Key Product Information FD30 fire rated: up to 30 minutes of fire resistance, third-party certified to the BM TRADA Q-Mark scheme. Oak veneer face: an oak veneer over a solid, fire-resisting core, not solid oak. Four panel shaker: straight-cut panels in a clean, simple shaker face. Supplied unfinished: treat every face and edge with a hardwax oil before use, in your choice of tone. Generous trim allowance: up to 30mm can be taken off the width and height. FSC certified, 10 year warranty: responsibly sourced timber, backed by Deanta's 10-year manufacturer's warranty.
Related
Related