EverSolo DMP-A8 Gen 2 Music Streamer, DAC & Preamplifier

All Elite Audio Verified independent store

→

Eversolo DMP-A8 Gen 2 Network Streaming DAC and Preamplifier A full digital audio hub built around dual AKM conversion, a fully balanced preamp stage, and a completely redesigned t ouchscreen interface. A Redesigned Front End for Daily Use The Eversolo DMP-A8 Gen 2 is built around an 8.6 inch LCD touchscreen, larger and sharper than the display on the original DMP-A8, and paired with a new interface system designed around real time visual feedback. As music plays, the screen can show VU meters, a dynamic spectrum analyzer, or album art in several artistic layouts, and it responds to the music in real time rather than showing static information. Underneath that display sits a genuine change in how the unit is organized internally. The Standard version measures 388mm by 265mm by 88mm, a wider and lower chassis than its predecessor, which EverSolo says was done in part to create more internal room for thermal management and layout optimization. For a component that will likely sit in a rack or on a shelf at ear level, that lower profile and wider footprint tends to look more at home next to a preamp or integrated amp than a taller, narrower box would. Core Digital Audio Architecture At the heart of the DMP-A8 Gen 2 is a two chip approach to digital audio: an AK4191EQ handles digital signal processing while a separate AK4499EX chip performs the actual digital to analog conversion. Splitting these two jobs across dedicated chips, rather than asking one chip to do both, is a design choice EverSolo carried over from the original DMP-A8, and the idea behind it is simple. Digital processing and analog conversion each generate their own electrical noise, and keeping them on separate silicon with separate power handling reduces the chance that one process interferes with the other. The result on paper is genuinely impressive for a component in this price range: total harmonic distortion plus noise as low as 0.000075 percent, and a signal to noise ratio and dynamic range both reaching up to 129dB. In plain terms, that means an extremely low noise floor, so quiet passages in music retain detail instead of being masked by hiss or hum from the electronics themselves. The unit supports native DSD512 and PCM up to 768kHz at 32 bit resolution, which covers essentially every high resolution format a source library or streaming service is likely to offer today. Volume Control and Preamp Stage The DMP-A8 Gen 2 is not just a DAC, it is a fully balanced preamplifier as well, and that distinction matters for how it fits into a system. Instead of a conventional digital volume control, EverSolo uses an R2R resistor ladder volume stage, a design that adjusts loudness by switching between precision resistors rather than manipulating the digital signal itself. Done well, this approach tends to preserve tonal balance and dynamic range more consistently as you turn the volume down, which is a common weak point in cheaper digital volume implementations. Combined with fully balanced analog circuitry throughout, this means the DMP-A8 Gen 2 can connect directly to a power amplifier or a pair of active speakers using its XLR outputs, without needing a separate preamp in between. Processing Power and Music Library Management Behind the interface is a 64 bit octa core processor with 8GB of RAM and 64GB of internal storage, a meaningful jump from the prior generation. EverSolo states this platform can scan and organize a library of roughly 200,000 tracks in about two hours, which matters more than it might sound. Anyone who has waited on a slow streamer to index a large local library, or watched a system stutter while trying to browse thousands of albums, will recognize the value of that headroom. The unit also includes an updated version of EverSolo's AuralEngine USB audio processing system, which governs how high resolution digital audio is scheduled and transmitted internally, helping keep playback stable when handling demanding formats like native DSD512. Connectivity for Real World Systems The connection panel on the DMP-A8 Gen 2 is built to work as the center of a system rather than a single purpose streamer. Digital inputs include optical and coaxial connections for sources like a television or an external CD transport, while a dedicated USB B input accepts a direct connection from a computer running Windows, macOS, Android, or iOS, supporting up to DSD512 and PCM 768kHz at 32 bit. On the output side, USB Audio and AES connections allow the DMP-A8 Gen 2 to function purely as a digital transport feeding an external DAC, while IIS output pushes the same DSD512 and 768kHz PCM capability to compatible external converters. Analog connectivity includes both XLR and RCA inputs for pairing with an external analog source, and XLR and RCA preamp outputs for driving a power amp or active speakers directly. A new SFP fiber network port offers an electrically isolated alternative to standard Ethernet for buyers concerned about network noise reaching sensitive audio circuits, and a dedicated subwoofer output with an adjustable crossover from 40 to 500Hz makes bass management straightforward for two channel systems that want to add low end extension without a full surround processor. Streaming Services and Room Correction The DMP-A8 Gen 2 comes with native support for TIDAL, Qobuz, Amazon Music, Apple Music, Deezer, HIGHRESAUDIO, IDAGIO, SoundCloud, and internet radio through TuneIn and Radio Paradise, along with TIDAL Connect, Qobuz Connect, Spotify Connect Lossless, and DLNA for streaming from other apps and devices. For buyers dealing with a difficult listening room, the updated evotune Pro room correction system adds custom target curve support and FIR correction filters on top of its existing bass control tools, allowing a more tailored fix for a specific room's acoustic quirks rather than a single generic correction curve applied to every system. How It Compares Within EverSolo's own lineup, the DMP-A8 Gen 2 sits above the more compact DMP-A6 Gen 2, trading some size and cost for the R2R preamp stage, the higher spec AK4499EX conversion, and the added connectivity described above. Key Specifications Brand: Eversolo Model: DMP-A8 Gen 2 (Standard Edition) Category: Network Streaming DAC and Preamplifier Price: $1,980 Display: 8.6" LCD touchscreen Dimensions: 388mm x 265mm x 88mm (L x W x H) Weight: Not published by Eversolo at time of writing; contact All Elite Audio to confirm shipping weight before ordering Audio DAC: AK4191EQ digital processor with AK4499EX conversion Audio Clock: Dual ultra low phase noise clock DAC Decoding: Up to stereo DSD512 native and PCM 768kHz/32 bit THD+N: As low as 0.000075% SNR / DNR: Up to 129dB Processor: 64 bit octa core Memory: 8GB DDR RAM plus 64GB eMMC internal storage USB Ports: USB 3.0 x2 Ethernet: RJ 45 (10/100/1000Mbps) Wi-Fi: Dual band Wi-Fi 6 (2.4G plus 5G) Network: SFP fiber network support (SFP module not included) Internal Storage Expansion: M.2 NVMe PCIe 3.0 2280 slot, supports up to 8TB SSD (SSD not included) USB B Audio Input: Up to stereo DSD512 native and PCM 768kHz/32 bit, compatible with Windows, macOS, Android, and iOS Digital Inputs: Optical, coaxial Digital Outputs: USB Audio, AES, optical, coaxial, IIS ARC Input: Up to stereo PCM 192kHz/24 bit Analog Inputs: XLR (balanced), RCA (pre in) Analog Outputs: XLR (balanced), RCA (pre out) Subwoofer Output: Adjustable crossover, 40Hz to 500Hz CD Playback: Not included on Standard Edition (Master Edition only) Warranty: Manufacturer's authorized dealer warranty; contact All Elite Audio for full terms and length Availability: In stock at All Elite Audio Why Buy From All Elite Audio All Elite Audio is an authorized Eversolo dealer, which means every DMP-A8 Gen 2 sold through us carries full manufacturer warranty coverage and comes from a properly sourced unit, not a gray market import. Our team sets up and listens to the gear we sell before it goes out the door, and we're available to help with system matching, room correction setup, and network configuration long after the sale. If you have questions about pairing the DMP-A8 Gen 2 with a specific amplifier or speaker set, we're glad to walk through it with you. Call: 443-402-5055Text: 443-402-5064Visit: 1921 York Rd, Timonium, MD 21093 FAQ How does the Standard Edition compare to the Master Edition?The Master Edition builds on the Standard version primarily in three areas: a custom internal CD playback system that the Standard version does not have, a more advanced OCXO clock with PLL technology and support for an external 10MHz clock input, and additional electrical isolation for even lower noise. The Master Edition is also slightly taller at 98.5mm compared to 88mm for the Standard version, to accommodate that added circuitry. For most buyers building a strong two channel streaming system, the Standard Edition's dual ultra low phase noise clock and AK4499EX conversion already deliver excellent measured performance, and the Master Edition is really aimed at buyers chasing the last increment of timing precision or who specifically want built in CD playback. How does this compare to the smaller DMP-A6 Gen 2?The DMP-A6 Gen 2 is Eversolo's smaller, more compact streaming DAC, and it does not include the same fully balanced R2R preamp stage or the AK4499EX conversion found in the DMP-A8 Gen 2. If you already have a preamp in your system and just need high quality digital to analog conversion and streaming, the A6 Gen 2 may cover your needs at a lower price point. The DMP-A8 Gen 2 is the better choice if you want a single unit to serve as both your source and your system's preamplifier, since its balanced XLR outputs can connect directly to a power amp. What does DSD512 and PCM 768kHz/32 bit actually mean for me?These numbers describe the highest resolution digital audio formats the DMP-A8 Gen 2 can decode natively without downsampling. DSD is the format used on Super Audio CDs and by many high resolution download services, and DSD512 represents a very high sample rate version of that format. PCM 768kHz/32 bit refers to conventional digital audio at an extremely high sample rate and bit depth, well beyond standard CD quality. In practical terms, this means the unit has more than enough decoding headroom for essentially any high resolution file or stream you're likely to encounter now or in the next several years, so you won't run into a format the DAC can't handle natively. What else do I need to build a complete system around this unit?Since the DMP-A8 Gen 2 includes a full preamp stage, you can pair it directly with a power amplifier and a set of passive speakers, or with a pair of active speakers that accept a balanced XLR input. You'll also want an Ethernet connection or a strong Wi-Fi 6 network for streaming, and if you plan to store a large local music library, an internal SSD installed in the M.2 slot or an SFP module for the fiber network port, both of which are sold separately. Beyond that, cabling for your specific outputs, whether XLR, RCA, or digital, will depend on what you're connecting it to, and our team can help you put together the full list based on your existing gear. Can I use my own external DAC with this instead of the built in one?Yes. The DMP-A8 Gen 2 can function purely as a digital transport, sending audio out through its USB Audio, AES, optical, coaxial, or IIS outputs to an external DAC of your choosing, bypassing its own internal conversion entirely. This is useful if you already own a DAC you're attached to and want to take advantage of the DMP-A8 Gen 2's streaming platform, processing power, and touchscreen interface without changing your existing conversion and preamp setup. Does it work with Roon and other third party control apps?The DMP-A8 Gen 2 supports DLNA along with TIDAL Connect, Qobuz Connect, and Spotify Connect Lossless, which cover a wide range of third party control scenarios where you're streaming from another app to the unit. For buyers specifically asking about Roon compatibility, we recommend confirming current Roon Ready or Roon Core certification status with us directly before purchase, since certification details can change between firmware updates and we want to give you an accurate answer rather than a guess. Does the Standard Edition play CDs?No. The in house CD playback system built into the DMP-A8 Gen 2 series is exclusive to the Master Edition. The Standard version relies on its optical and coaxial digital inputs if you want to connect an external CD transport, but it does not have an internal drive of its own. If ripping or playing physical CDs directly through the unit is a priority for you, the Master Edition is the version to consider instead. What is the SFP fiber network port for, and do I need it?The SFP port gives you the option to connect the DMP-A8 Gen 2 to your network using a fiber optic module rather than a standard Ethernet cable, which electrically isolates the unit from noise that can travel through a copper network connection. Most buyers will do just fine using the standard RJ 45 Ethernet port or the built in Wi-Fi 6, and the SFP port is really there for buyers who have already invested in a fiber based network setup or who are specifically trying to eliminate every possible source of electrical noise in their system. The SFP module itself is not included and would need to be purchased separately if you want to use this connection. Where can I buy the Eversolo DMP-A8 Gen 2?The Eversolo DMP-A8 Gen 2 is available now at All Elite Audio, located at 1921 York Rd, Timonium, MD 21093, and as an authorized Eversolo dealer we can get you set up with a fully warrantied unit. You can call us at 443-402-5055, text us at 443-402-5064, or stop by the showroom to hear the DMP-A8 Gen 2 in person before you buy. We're also happy to help you plan out the rest of your system, from amplification to speakers, so everything works together from day one. Show more