The Euro-Series is an original design with some Euro inspiration! You'll find hints and touches of this on the cab, like the raised center and runners on the hood, curves in places we dared to design, our new rolled front end, slantback roof, the new slotted grill with the iconic quad headlights, with detailed side vents, RHD interior with all new sport seats, handbrake, and modern dash. New mag slots on body are keyed but now give you extra slots to help place body for any setup! This cab will work with the T-18 and scx24 chassis. The stock T-18 will require laydown servo, lowered shock towers, and relocated stock electronics. All cabs, beds, and back plates will now be attached via M3 x 6mm screws, this will allow for easy change between our different options, as well as different wheel bases (155 beds coming soon) For gluing parts to the body, you can use a CA glue, or my favorite is Shoe Goe, the rubbery type glue helps with impacts and is also great for magnets. MagSliderz mounting system has been completely re-worked. All 24th scale body's will use the same MagSliderz, we have 9 options: 🟢 0° Stock Chassis or any chassis that uses a stock type skid with 0° 🟢 0° Athos C1 - NWCW 🟢 5° Goblin - Hardpark and for slotted for use with Standard type Skids 🟢 5° OGRC Skid 🔴 6° EVO 24 - JEC can only be found on our FlubRC MagSliderz page 🟢 5.5° Spectr - KillrChassis 🔴 6.3° Bully - NWCW can only be found on our FlubRC MagSliderz page 🟢 11° Spectr Pro - KillrChassis 🟢 11° Athos - NWCW We For gluing parts to the body, you can use a CA glue, or my favorite is Shoe Goe or e6000. The rubbery type glue helps with impacts and is also great for Magnets. CarbonFiber colors have a print quality increase, including higher temp and impact resistance. It also provides a textured matte finish, the raw prints can be painted without prep if desired. For normal paint preparation, we recommend starting with 220 Wet Sand with a flexible block, then move to 320 Wet Sand. Use a high fill sandable primer, and wet sand with 400, repeat last step until desired finish is achieved before base coat. When choosing a color and planning to paint, you have options! You can pick the same color as your paint, so scratches will be less visible!Bodies do require prep if planning to paint. For prep we reccomend starting with 220 Wet Sand with a flexible block, then move to 320 Wet Sand. Use a high fill sandable primer, and wet sand with 400, repeat last step until desired finish is achieved. ***All products are made to order. Please check the header on the main page for approximate lead times. Thank you for your support and patience - FlubRC
