Description The Halox is a 250mm 2-light wall light with a polished chrome body and two sandblasted Pyrex glass diffusers, each housing a G9 bulb (sold separately). The metal body wraps around the glass panels in a curved profile, projecting 90mm from the wall and casting light both upwards and downwards through the frosted glass. Designed for hallways, living rooms, bedrooms and home offices where wall-mounted accent lighting is needed without overhead fittings, the Halox pairs ambient and decorative function. The 250mm length suits installation above side tables, flanking mirrors, or spaced along corridors at 1.5-2m intervals. The compact footprint fits walls with limited horizontal space, and the 90mm projection keeps the fitting clear of door swings and furniture placed close to walls. The polished chrome finish provides a high-reflectivity surface that catches daylight and artificial light, making the fitting itself part of the room's visual language even when switched off. The sandblasted Pyrex glass softens the light from the G9 bulbs and hides the bulb filament or LED array from direct view, reducing glare while maintaining enough clarity to show the warm glow of the light source behind the glass. The fitting is dimmable when paired with compatible G9 dimmable bulbs and a trailing-edge dimmer. Specification Length (mm) 250 Projection (mm) 90 Dimmable Yes Number Of Bulbs 2 Bulb Type G9 IP Rating IP20 Warranty 5 Years Frequently Asked What bulbs does it take? The Halox takes two G9 capsule bulbs, sold separately. G9 bulbs are available in LED (typically 2-5W) and halogen (up to 40W). Most users pair this fitting with warm-white LED G9 bulbs at 2700K-3000K for general ambient lighting. Is it dimmable? Yes, the fitting itself is dimmable. You will need dimmable G9 bulbs and a compatible trailing-edge dimmer switch to control the light level. Not all G9 LED bulbs are dimmable, so check the bulb specification before purchasing. Can it be used in bathrooms? No. The IP20 rating means the fitting is not protected against moisture and should only be used in dry indoor environments. Bathrooms require IP44 or higher ratings depending on zone placement. How is it fitted to the wall? The Halox mounts to a standard wall backplate using screws and wall plugs. The 90mm projection means the fitting sits clear of the wall surface, so ensure there is adequate clearance from door frames, furniture and other wall-mounted fittings before installation.
