Description The Halox is a 440mm two-light wall fitting built from white-finished metal sheet with two sandblasted Pyrex glass diffusers set into rectangular apertures. Each diffuser houses an E27 bulb fitting (bulbs sold separately), and the sandblasted glass softens the light output into a diffuse wash along the wall surface and outward into the room. Designed for hallways, staircases, bedrooms and living rooms where balanced ambient light is needed without a dominant ceiling fitting, the Halox works as a single unit in smaller spaces or in multiples along a corridor or stairway. The 125mm projection from the wall gives enough clearance to avoid head-height issues in standard 2.4m ceiling-height rooms, while the 440mm width provides spread without overwhelming narrow hallways. The white finish allows the fitting to sit flush with light-painted walls or act as a clean accent against darker tones. The metal construction and Pyrex glass give the fitting a solid 1.2kg weight that feels stable once wall-mounted, and the IP20 rating confirms it's built for dry indoor use only. The fixture is dimmable when paired with dimmable E27 LED or halogen bulbs and a compatible wall dimmer, allowing output to be adjusted from full brightness for task lighting to low ambient levels for evening use. The five-year warranty from Ideal Lux covers manufacturing defects and component failure under normal residential use. Specification Length (mm) 440 Projection (mm) 125 Dimmable Yes Number Of Bulbs 2 Bulb Type E27 IP Rating IP20 Warranty 5 Years Frequently Asked What bulbs does it take? The Halox takes two standard E27 Edison screw bulbs, sold separately. Most users pair this with warm-white LED bulbs between 6-10W and 2700K-3000K for ambient hallway or living room lighting. Is it dimmable? Yes, when fitted with dimmable E27 LED or halogen bulbs and connected to a compatible wall dimmer switch. Check bulb packaging for dimmer compatibility before purchasing. Can it be used in bathrooms? No. The IP20 rating means the fitting is designed for dry indoor areas only and is not protected against moisture or water ingress. It should not be installed in bathrooms, wet rooms or outdoor locations. How is it mounted? The Halox mounts to a standard UK wall with two fixing points concealed behind the metal backplate. The backplate is fixed first, then the main body clips or screws onto it, with the cable run concealed inside the wall cavity or surface-mounted conduit.
