HCT Front Splitter Mounting Tubes (pair) for Yeah Racing aluminum shock tower. If you installed (or plan to install) the Yeah Racing front aluminum shock tower, you’ll need these mounting tubes for best fitment. It’s what I initially developed for my Honda City Turbo Senna Edition that is shown in the build video. I later developed the stock mounting tube so that the front splitter can fit on the stock mount. Be sure to use the original countersunk washers from your original splitter part when assembling this. Parts: Splitter Mounting Tubes for Yeah Racing Shock Tower (Qty 2) Hex bolts (Qty 2) Tips: Some parts may still have some support tree remnants. Using needle nose pliers can pluck those stray strands off the main part. You can also sand down the parts to make them smooth, but be aware that it may lighten or dull the sanded area as compared to the rest of the part if you don't plan on painting them (I didn't paint any of the black parts and kept them bare). If a bolt needs to get through a stubborn hole, a hole reamer or even a simple hex driver may be all that's needed to make the hole larger for the bolt. Some of the large flat surfaces with speckled/rough texture may have residual hot bed adhesion glue residue still on them. If you want to remove that slightly sticky surface, simply clean it with warm water and a micro dot of dish soap (and a soft green Brillo pad can be used to help get the residue off faster).