Front tow hook mount with red aluminum hook, hex bolt, nut. My preference is E6000 glue for this type of application to mount the assembled unit on the back of the the front spoiler area. Part comes with M1.4 hardware (bolt and nut), but the tow hook housing will fit up to your own supplied M2 bolt and nut if desired (will require you to drill the red tow hook for the M2 bolt to fit through it). The included M1.4 bolt will require a little amount of force to “thread” into the aluminum red tow hook. Note: Sold as 1 item. Photos show 2 tow hooks to show individual parts and as an assembled item. Parts: Tow Hook Mount Aluminum Tow Hook, red M1.4 bolt stainless steel 12mm M1.4 nut (removable thread lock recommended) This part is also included in the following kits: HCT Pro Kit HCT Body Bits Kit Tips: Some parts may still have some support tree remnants. Using needle nose pliers can pluck those stray strands off the main part. You can also sand down the parts to make them smooth, but be aware that it may lighten or dull the sanded area as compared to the rest of the part if you don't plan on painting them (I didn't paint any of the black parts and kept them bare). If a bolt needs to get through a stubborn hole, a hole reamer or even a simple hex driver may be all that's needed to make the hole larger for the bolt. Some of the large flat surfaces with speckled/rough texture may have residual hot bed adhesion glue residue still on them. If you want to remove that slightly sticky surface, simply clean it with warm water and a micro dot of dish soap (and a soft green Brillo pad can be used to help get the residue off faster).
