iBMS: Interface for BMS Your browser does not support our video. Standalone version, for the older JK-BMS B series, no Multi-BMS support, at reduced cost. NOTE: Can NOT be combined with other iBMS boards, STANDALONE use only! This all new Interface is designed with many features: Supports Most Inverters with CAN communications, profiles for: BYD, Deye, Generic, Goodwe, Pylon, LIA (beta), Victron: with Type A cable New iBMS firmware completely written in esp-idf using 100% my own code, no more esp-home. New companion Home Assistant integration(custom component must be installed) Web page designed for mobile phone size screens Standalone use, 1 BMS only. Future proof, can be used with the original JK-BMS or the new Inverter type.One board to rule them all. *firmware upgrade required DIP switches to enable CAN termination. Improved CAN bus driver chip TVS Transient voltage suppression, to protect the CAN driver chip. On board buck converter with resettable fuse. The original JK-BMS with the 4 pin connecter supplies power to board, plug and play. Professionally manufactured and burn in testing. Lead free construction, greener and low environmental impact! Supports most of the original JK-BMS models with the small 4 pin GPS connector:JK-BD6A17S6P/ JK-BD6A20S6P / JK-BD6A24S6P / JK-BD6A20S10P / JK-B1A20S15P / JK-B1A24S15P / JK-B2A8S20P / JK-B2A20S20P / JK-BD2A24S20P / JK-B2A25SRP Hardware connectors:1x 4 Pin JST connector for original JK-BMS2 x RJ45 CAN for connection to Inverter/slavesWhat's included:1 x iBMS interface board1 x 4 pin JST 30cm cable for the original JK-BMS B Series1 x Digital download of instructions and our Home Assistant integration
