Gutter Guard for Lysaght Flatdek Roofs LeafStopper DEKGUARD is a gutter guard system designed specifically for Lysaght Flatdek metal roof profiles. The DEKGUARD system uses the purpose-designed Gripit fastening system to secure the Mesh Shield to the flat section of the roof profile where traditional corrugated roof saddles are not suitable. This product is designed to suit the Lysaght Flatdek roof profile with a 45mm rib height and 250mm cover width. Flatdek requires approximately 12 Gripits per metre to support the Mesh Shield correctly along the roof edge. If your Colorbond® roof uses the Flatdek profile, this DEKGUARD kit has been designed specifically for that roof shape. Compatible Roof Profile Manufacturer: Lysaght Roof Profile: Flatdek Rib Height: 45mm Cover Width: 250mm Gripit Requirement: 12 Gripits per metre Why Flatdek Requires DEKGUARD Lysaght Flatdek is a concealed-fix metal roof profile featuring flat pans and raised ribs. Unlike standard corrugated roof profiles, Flatdek needs a gutter guard fixing method designed for flat-based metal roofing. Traditional corrugated roof gutter guard systems use saddles shaped for curved corrugations. These fixing methods are generally unsuitable for Flatdek roofs. DEKGUARD uses patented Gripit brackets designed specifically for flat-based roof profiles. Gripits secure the Mesh Shield to the flat section of the roof profile, helping create a secure installation while allowing rainwater to flow into the gutter. Watch: DEKGUARD System Overview Watch: How Gripits Work Watch: DEKGUARD Installation Guide What Comes in the DEKGUARD Kit? 250mm wide Mesh Shield roll in your selected kit length and selected Mesh Shield option (Standard, Premium or Fine Mesh) Trimets – used to connect the mesh to the gutter edge using hexagonal head screws Gripit brackets – the quantity required for Flatdek is automatically calculated when this roof profile is selected Colour-matched screws to match the Trimets and Gripits 1 free socket included with your order for hexagonal head screws Mesh Options Available Standard Mesh: 3.5mm x 3.5mm aluminium mesh designed for general leaf and debris protection. Premium Mesh: Uses the same 3.5mm x 3.5mm aperture as Standard Mesh but is manufactured from thicker aluminium. At 0.80mm thick, Premium Mesh is approximately 46% thicker than Standard Mesh for increased durability. Fine Mesh: 1.8mm x 1.8mm woven aluminium mesh. Fine Mesh is the only BAL-rated mesh option in the Leaf Stopper range. Helps Reduce Gutter Maintenance No gutter guard system is completely maintenance-free. However, DEKGUARD helps reduce how often gutter cleaning is required by limiting leaves, twigs and debris entering the gutter. This can be especially useful on Flatdek roofs near trees or exposed to wind-blown debris. Learn more about the benefits of gutter guards or read our guide explaining what gutter guard is and how it works. Improve Gutter Access with EasyAc For easier gutter inspection and cleaning, consider adding an EasyAc gutter access panel. EasyAc allows easier access for inspecting and flushing gutters without removing large sections of mesh. Learn More About DEKGUARD Visit the DEKGUARD information page to learn more about the patented Gripit fastening system and compatible roof profiles. Delivery Information Delivery is free when ordering a minimum 10 metre Leaf Stopper kit. Please provide a physical delivery address. We are unable to deliver to P.O. Boxes. Frequently Asked Questions Will DEKGUARD fit Lysaght Flatdek roofs? Yes. This DEKGUARD kit is specifically designed to suit Lysaght Flatdek metal roof profiles. What are the Flatdek profile dimensions? Flatdek has an approximate rib height of 45mm and cover width of 250mm. How many Gripits does Flatdek require? Flatdek requires approximately 12 Gripits per metre. The correct quantity is automatically calculated when this roof profile is selected. Can I install gutter guard on a Flatdek Colorbond® roof? Yes. DEKGUARD has been designed specifically for flat-based metal roof profiles such as Flatdek commonly used in Colorbond® roofing systems. Can standard corrugated gutter guard be installed on Flatdek roofs? Traditional corrugated roof gutter guard systems are designed for curved roof profiles and are generally unsuitable for Flatdek roofs. DEKGUARD uses Gripit brackets specifically designed for flat-based roof profiles. Can I install DEKGUARD myself? Yes. DEKGUARD kits are suitable for DIY installation if you are confident working safely at height and have the appropriate tools. Professional installation is also available through approved installers. Do I still need to maintain my gutters after installing DEKGUARD? Yes. DEKGUARD helps reduce debris entering the gutter, however periodic inspection and maintenance are still recommended.
