Gutter Guard for Lysaght Spanrib Roofs LeafStopper DEKGUARD is a gutter guard system designed specifically for Lysaght Spanrib metal roof profiles. The DEKGUARD system uses the purpose-designed Gripit fastening system to secure the Mesh Shield to the flat section of the roof profile where traditional corrugated roof saddles are not suitable. This product is designed to suit the Lysaght Spanrib roof profile with a 48mm rib height and 820mm cover width. Spanrib requires approximately 11 Gripits per metre to support the Mesh Shield correctly along the roof edge. If your Colorbond® roof uses the Spanrib profile, this DEKGUARD kit has been designed specifically for that roof shape. Compatible Roof Profile Manufacturer: Lysaght Roof Profile: Spanrib Rib Height: 48mm Cover Width: 820mm Gripit Requirement: 11 Gripits per metre Why Spanrib Requires DEKGUARD Lysaght Spanrib is a concealed-fix metal roof profile commonly used on commercial, industrial and large residential buildings throughout Australia. The profile features wide flat pans and deep ribs, providing excellent spanning capabilities and water carrying capacity. However, these same design features mean traditional corrugated roof gutter guard systems are generally unsuitable. Unlike corrugated roof gutter guard systems that use saddles fixed over corrugation ribs, DEKGUARD uses patented Gripit brackets designed specifically for flat-based roof profiles. Gripits secure the Mesh Shield to the flat section of the roof profile, helping create a secure installation while maintaining effective rainwater flow into the gutter. The Spanrib profile requires approximately 11 Gripits per metre to provide the correct support and attachment points along the roof edge. About the Lysaght Spanrib Roof Profile Spanrib is one of Lysaght's heavy-duty roofing profiles and is commonly specified for commercial and industrial projects where long spans and structural performance are important. If you're searching for gutter guard for a Spanrib roof, DEKGUARD provides a purpose-designed solution that allows Mesh Shield to be securely attached without relying on traditional corrugated roof saddle systems. Watch: DEKGUARD System Overview Watch: How Gripits Work Watch: DEKGUARD Installation Guide What Comes in the DEKGUARD Kit? 250mm wide Mesh Shield roll in your selected kit length and selected Mesh Shield option (Standard, Premium or Fine Mesh) Trimets – used to connect the mesh to the gutter edge using hexagonal head screws Gripit brackets – the quantity required for Spanrib is automatically calculated when this roof profile is selected Colour-matched screws to match the Trimets and Gripits 1 FREE socket included with your order for hexagonal head screws Mesh Options Available Standard Mesh: 3.5mm x 3.5mm aluminium mesh designed for general leaf and debris protection. Premium Mesh: Uses the same 3.5mm x 3.5mm aperture as Standard Mesh but is manufactured from thicker aluminium. At 0.80mm thick, Premium Mesh is approximately 46% thicker than Standard Mesh for increased durability. Fine Mesh: 1.8mm x 1.8mm woven aluminium mesh. Fine Mesh is the only BAL-rated mesh option in the Leaf Stopper range. Helps Reduce Gutter Maintenance No gutter guard system is completely maintenance-free. However, DEKGUARD helps reduce how often gutter cleaning is required by limiting leaves, twigs and debris entering the gutter. This can be especially useful on large Spanrib roofs located near trees or exposed to wind-blown debris. Learn more about the benefits of gutter guards or read our guide explaining what gutter guard is and how it works. Improve Gutter Access with EasyAc For easier gutter inspection and cleaning, consider adding an EasyAc gutter access panel. EasyAc allows easier access for inspecting and flushing gutters without removing large sections of mesh. Learn More About DEKGUARD Visit the DEKGUARD information page to learn more about the patented Gripit fastening system and compatible roof profiles. Frequently Asked Questions Will DEKGUARD fit Lysaght Spanrib roofs? Yes. This DEKGUARD kit is specifically designed to suit Lysaght Spanrib metal roof profiles. What are the Spanrib profile dimensions? Spanrib has an approximate rib height of 48mm and cover width of 820mm. How many Gripits does Spanrib require? Spanrib requires approximately 11 Gripits per metre. The correct quantity is automatically calculated when this roof profile is selected. Can I install gutter guard on a Spanrib Colorbond® roof? Yes. DEKGUARD has been designed specifically for flat-based metal roof profiles such as Spanrib commonly used in Colorbond® roofing systems. Can standard corrugated gutter guard be installed on Spanrib roofs? Traditional corrugated roof gutter guard systems are designed for curved roof profiles and are generally unsuitable for Spanrib roofs. DEKGUARD uses Gripit brackets specifically designed for flat-based roof profiles. Can I install DEKGUARD myself? Yes. DEKGUARD kits are suitable for DIY installation if you are confident working safely at height and have the appropriate tools. Professional installation is also available through approved installers. Do I still need to maintain my gutters after installing DEKGUARD? Yes. DEKGUARD helps reduce debris entering the gutter, however periodic inspection and maintenance are still recommended.
