Solid basswood body LP Junior style double-cut guitar kit with a maple neck and chrome hardware. Full Specifications General Dexterity: Right-Handed Number of Strings: 6 Size: Full Size Build Difficulty: Beginner (3/10) Bolt-on neck joint bolts straight on, so there is no gluing or clamping to get right, but the ash Veneer veneer is thin and easy to sand through, so use a light touch at the edges Straightforward wiring with few connections to solder Fixed bridge with pre-drilled mounting keeps intonation setup simple Body Material: Basswood (2-3 pieces) Type: Solid Cutaway: Double Binding: None Top Veneer: Ash Veneer (1-2 mm in depth) Neck Material: Maple Joint: Bolt-on Profile: C-shaped Truss Rod: Two-Way, Adjustable Scale Length: 628mm (24.75″) Binding: Single Ivory Fretboard Material: Ebony (Engineered) Radius: 14" / 356mm Number of Frets: 22 Fret Wire: Stainless Steel Fret Size: Medium Jumbo Inlay Shape: Block Inlay Material: Pearl White Headstock Shape: Standard (as in product images) Binding: Multi-ply Ivory Nut: Bone Electronics Neck Pickup: None Bridge Pickup: P90 Controls: 1 Volume, 1 Tone Wiring: DIY (soldering required) Output Jack: Side jack Hardware Bridge: Wraparound Tuners: Chrome Sealed Pickguard: Black Knobs: Black Cavity Covers: Black Strings: Steel Finish: Chrome What's in the Box Double-cutaway body with an open-grain wood top, bolt-on neck pocket and a single pickup rout, unfinished Neck with a black fretboard and pearl-look block inlays, bound headstock, unfinished 6x chrome tuners with bushings and washers 1x black single-coil pickup with pointed mounting ears and six exposed pole screws Chrome wraparound bridge with six individual saddles 2x chrome bridge posts with knurled anchor bushings 2x black numbered speed knobs Pre-wired harness with pot and coloured wire Chrome square jack plate with output jack Black pickguard Black tapered truss rod cover Black rounded oblong cavity cover Black neck plate with four mounting screws Strap button with felt washer Set of strings Allen wrench Assorted screws Black instrument cable What You'll Need You will need to solder the electronics. Depending on the finish you choose, the tools below cover a standard build. For assembly: Phillips screwdriver, Allen wrench set For wiring: Soldering iron, solder, wire cutters For finishing: Sandpaper (220-600 grit), primer, paint or stain, clear coat For setup: String winder, guitar tuner, Allen wrench for truss rod and saddle height adjustment No woodworking or routing required - all cavities, holes, and channels are pre-cut.
Related
Related
Related
Related