Designed for easy construction, this solid mahogany body guitar kit features a double-cutaway design, bolt-on mahogany neck, and blues-style headstock, delivering vintage-inspired playability. Full Specifications General Dexterity: Right-Handed Number of Strings: 6 Size: Full Size Build Difficulty: Beginner (3/10) Single-pickup wiring is about as simple as electronics get Bolt-on neck joint bolts straight on, so there is no gluing or clamping to get right Mahogany has open grain that needs filling before finishing for a smooth result Body Material: Mahogany (2-4 pcs) Type: Solid Cutaway: Double Binding: None Top Veneer: None Neck Material: Mahogany Joint: Bolt-on Profile: C-shaped Truss Rod: Two-Way, Adjustable Scale Length: 628mm / 24.75″ Binding: None Fretboard Material: Rosewood Radius: 14" / 356mm Number of Frets: 22 Fret Wire: Stainless Steel Fret Size: Medium Jumbo Inlay Shape: Dot Inlay Material: Ivory Plastic (ABS) Headstock Shape: Standard (as in product images) Binding: None Nut: Bone Electronics Neck Pickup: None Bridge Pickup: Humbucker Controls: 1 Volume, 1 Tone Wiring: DIY (soldering required) Wiring Diagram: Single Humbucker, 1 Volume, 1 Tone Output Jack: Side jack Hardware Bridge: Tune-O-Matic w/ stopbar Tuners: Closed Pickguard: Black Knobs: Chrome Cavity Covers: Black Strings: Steel Finish: Chrome What's in the Box Unfinished double-cutaway body, routed for one pickup and a control cavity Neck with dark fingerboard, dot position markers and a drilled headstock 6x chrome sealed tuners 1x bag of chrome bushings and washers 1x chrome covered humbucker in a black mounting ring 1x pre-wired control harness with two potentiometers and hookup wire 2x chrome dome knobs 1x chrome bridge with six adjustable saddles 1x chrome stop tailpiece 2x chrome posts and 2 chrome bushings Chrome washers and lock rings 1x chrome neck plate 4x neck mounting screws 1x chrome jack plate with output jack 1x black pickguard 1x black oval control cavity cover 1x black truss rod cover 1x bag of assorted screws 2x strap buttons 1x set of strings 1x Allen wrench 1x guitar cable with one angled plug What You'll Need You will need to solder the electronics. Depending on the finish you choose, the tools below cover a standard build. For assembly: Phillips screwdriver, Allen wrench set For wiring: Soldering iron, solder, wire cutters For finishing: Sandpaper (220-600 grit), wood grain filler, primer, paint or stain, clear coat For setup: String winder, guitar tuner, Allen wrench for truss rod and saddle height adjustment No woodworking or routing required - all cavities, holes, and channels are pre-cut.
Related
Related
Related
Related