ECLIPSE Flood Light 18" ECLIPSE Flood Light 18", LS, (60-0469) FAQs Who should install/maintain the ECLIPSE flood light, and what’s the key safety step?The installation manual states it should be handled by a qualified electrician and power must be OFF during work. What tightening torque is specified for the bracket hardware/light mounting?The bracket-mount instructions specify tightening to 5Nm and warn not to overtighten. What sealant/cleanup guidance is given for flush mounting?Use a suitable marine grade sealant (example given: 3m 4200). Clean excess with a rag and soapy water; don’t use chemicals. For flush mounting, what is the maximum screw tightening torque?Tighten the screws to a torque not exceeding 5nM for flush mounting. For bracket mounting, what size hole is in the bracket and what bolt size is it for?The manual says the bracket has a 6.5mm hole suitable for an M6 bolt (supplied). For flush mounting, what should you check before cutting the mounting hole?The manual says to check there are no obstructions behind the light location. For bracket mounting, what size hole is recommended for the cable pass-through?The manual instructs drilling a 6mm (0.236in) hole for the cable when bracket mounting. What mounting surface is recommended for bracket mounting?Choose a mounting location that is flat and durable. Who do I contact for help with installation, servicing or advice?Contact the SailRACE team — as certified marine experts we're happy to help with product selection, installation and after-sales servicing, before and after your purchase. {"@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [{"@type": "Question", "name": "Who should install/maintain the ECLIPSE flood light, and what’s the key safety step?", "acceptedAnswer": {"@type": "Answer", "text": "The installation manual states it should be handled by a qualified electrician and power must be OFF during work."}}, {"@type": "Question", "name": "What tightening torque is specified for the bracket hardware/light mounting?", "acceptedAnswer": {"@type": "Answer", "text": "The bracket-mount instructions specify tightening to 5Nm and warn not to overtighten."}}, {"@type": "Question", "name": "What sealant/cleanup guidance is given for flush mounting?", "acceptedAnswer": {"@type": "Answer", "text": "Use a suitable marine grade sealant (example given: 3m 4200). Clean excess with a rag and soapy water; don’t use chemicals."}}, {"@type": "Question", "name": "For flush mounting, what is the maximum screw tightening torque?", "acceptedAnswer": {"@type": "Answer", "text": "Tighten the screws to a torque not exceeding 5nM for flush mounting."}}, {"@type": "Question", "name": "For bracket mounting, what size hole is in the bracket and what bolt size is it for?", "acceptedAnswer": {"@type": "Answer", "text": "The manual says the bracket has a 6.5mm hole suitable for an M6 bolt (supplied)."}}, {"@type": "Question", "name": "For flush mounting, what should you check before cutting the mounting hole?", "acceptedAnswer": {"@type": "Answer", "text": "The manual says to check there are no obstructions behind the light location."}}, {"@type": "Question", "name": "For bracket mounting, what size hole is recommended for the cable pass-through?", "acceptedAnswer": {"@type": "Answer", "text": "The manual instructs drilling a 6mm (0.236in) hole for the cable when bracket mounting."}}, {"@type": "Question", "name": "What mounting surface is recommended for bracket mounting?", "acceptedAnswer": {"@type": "Answer", "text": "Choose a mounting location that is flat and durable."}}, {"@type": "Question", "name": "Who do I contact for help with installation, servicing or advice?", "acceptedAnswer": {"@type": "Answer", "text": "Contact the SailRACE team — as certified marine experts we're happy to help with product selection, installation and after-sales servicing, before and after your purchase."}}]}
