ECLIPSE Flood Light 4" ECLIPSE Flood Light 4", LS, (60-0467) FAQs Who is qualified to install and maintain the ECLIPSE Flood Light 4"?It should only be installed, inspected, and maintained by a qualified electrician, following applicable electrical codes, with power OFF during work. In the single switch wiring diagram, what should be done with the yellow wire?In the single switch wiring diagram, the yellow wire is shown as no connection. In momentary-switch wiring, which wires are listed as “No connect” and should be isolated?The manual states RED, WHT, and BLU are no-connect and any unused wires should be isolated. When wiring multiple lights with a LUX module, how should the black wires be connected?Connect the black wire from each light and the LUX Module to a common ground. What bracket hole size/fastener is specified for bracket mounting?The bracket uses a 6.5 mm hole suitable for an M6 bolt (supplied). What torque is specified when tightening the light to the bracket?Tighten the bracket-mounted light to 5 Nm and do not overtighten. For flush mounting, what should be checked behind the mounting location?Before flush mounting, make sure there are no obstructions behind the chosen light location. Which wire is ground (GND) in the wiring diagram?The wiring diagram labels the black wire as ground (GND). Who do I contact for help with installation, servicing or advice?Contact the SailRACE team — as certified marine experts we're happy to help with product selection, installation and after-sales servicing, before and after your purchase. {"@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [{"@type": "Question", "name": "Who is qualified to install and maintain the ECLIPSE Flood Light 4\"?", "acceptedAnswer": {"@type": "Answer", "text": "It should only be installed, inspected, and maintained by a qualified electrician, following applicable electrical codes, with power OFF during work."}}, {"@type": "Question", "name": "In the single switch wiring diagram, what should be done with the yellow wire?", "acceptedAnswer": {"@type": "Answer", "text": "In the single switch wiring diagram, the yellow wire is shown as no connection."}}, {"@type": "Question", "name": "In momentary-switch wiring, which wires are listed as “No connect” and should be isolated?", "acceptedAnswer": {"@type": "Answer", "text": "The manual states RED, WHT, and BLU are no-connect and any unused wires should be isolated."}}, {"@type": "Question", "name": "When wiring multiple lights with a LUX module, how should the black wires be connected?", "acceptedAnswer": {"@type": "Answer", "text": "Connect the black wire from each light and the LUX Module to a common ground."}}, {"@type": "Question", "name": "What bracket hole size/fastener is specified for bracket mounting?", "acceptedAnswer": {"@type": "Answer", "text": "The bracket uses a 6.5 mm hole suitable for an M6 bolt (supplied)."}}, {"@type": "Question", "name": "What torque is specified when tightening the light to the bracket?", "acceptedAnswer": {"@type": "Answer", "text": "Tighten the bracket-mounted light to 5 Nm and do not overtighten."}}, {"@type": "Question", "name": "For flush mounting, what should be checked behind the mounting location?", "acceptedAnswer": {"@type": "Answer", "text": "Before flush mounting, make sure there are no obstructions behind the chosen light location."}}, {"@type": "Question", "name": "Which wire is ground (GND) in the wiring diagram?", "acceptedAnswer": {"@type": "Answer", "text": "The wiring diagram labels the black wire as ground (GND)."}}, {"@type": "Question", "name": "Who do I contact for help with installation, servicing or advice?", "acceptedAnswer": {"@type": "Answer", "text": "Contact the SailRACE team — as certified marine experts we're happy to help with product selection, installation and after-sales servicing, before and after your purchase."}}]}
