MSK-E110-A8 is a compact benchtop, 8-channels automatic assembling machine designed for CR20XX and other 20mm-diameter coin cells. It performs fully automated sequential operations from assembling, electrolyte injection, and cell sealing. The system utilizes servo-motor and a precision load sensor to ensure stable and reliable pressure. Its compact design allows operation inside a glovebox or dry room. SPECIFICATION Feature Easy touchscreen control Fully automated assembly sequence, including component assembling, electrolyte injection, and cell sealing Compact design suitable for operation inside a glovebox Adjustable electrolyte injection volume A vacuum module to provide p 8 coin cells can be automated assemble per single load Power AC110V±10% or AC220V±10%, Single Phase, 50/60 Hz, selected under the optional bar Output Power: 350W Assembling Sequence Two assembly sequences are available for CR2032 coin cell assembling. The negative assembling sequence is default mode, the positive assembling sequence can be configured upon request. Please contact MTI before purchase Negative Assembling Sequence (default): anode case, spacer, anode disc, separator, cathode disc, spacer, spring, and cathode case Positive Assembling Sequence: cathode case, cathode disc, separator, anode disc, spacer, spring, and anode case Different assembling sequences can be customized upon request. Please contact MTI for details Assembling Efficiency Approximately 90 seconds per cell ( after loading components Loading Method Manual loading the materials into the stations. Subsequently, assemble the coin cell as the assembly sequence Positioning Accuracy Stacking Concentricity: ±0.1 mm Assembling Accuracy Tray Processing: ±0.05mm Sealing Pressure Adjustable sealing pressure Max. sealing pressure: 1000KG Pressure Sensor Accuracy: ±0.5% F.S For the CR20 series coin cell, 500-700KG sealing pressure is recommended Injection Mechanism Equipped with a peristaltic pump with adjustable electrolyte injection volume Dispensing accuracy of ±7% (0.1 g) Suggested Electrolyte Filling Volume: approximately 75 mg for the negative assembling sequence and approximately 100 mg for the positive assembling sequence Sealing Die A CR2032 sealing die is included in the standard package Other sealing dies are available upon request Glovebox Compatibility Maintenance & Equipment Care Electrolytes are highly corrosive; therefore, the die set must be cleaned with ethanol after each use to avoid any corrosion damage Please be aware that MTI is not responsible for any damages resulting from improper use and abuse of the product
