THIS IS A DROP SHIPPED OR SPECIAL ORDER ITEM. PLEASE CONTACT OR LEAVE A NOTE IN THE COMMENTS BOX REQUESTING ESTIMATED WAIT TIME FOR SHIPPING Model – 2514GFE 240 or 208 volt Inside dimensions: 37″ wide x 25″ front-to-back x 13.5” deep, fires to 1700°F Glass firing oval kilns are designed for large workloads and unusual shapes that do not fit in cylindrical or square kilns, and are used for fusing, forming glass shapes, and heat-treating. 240-208-volt glass fusing models are equipped with a lid element for the fusing segment of the glass firing and body elements for the ramping up-down and annealing segments of the firing. Element Design and Heat Control An infinite switch controls the intensity of the heat coming from the lid element. If the switch remains in the OFF position, only the body elements will heat the kiln. If the infinite switch is set to the High position, all elements, both the body and the lid, heat at the same intensity. The kiln operator may choose to lessen the intensity of the lid element by turning the switch down. Standard Equipment, Controller, and Warranty Models come equipped with a pilot light, an 18″ tall metal stand or frame, a stainless-steel jacket, a lid lift assist, and a Bartlett Instruments KilnStar digital controller. Two-year Limited Kiln Warranty. Controller Upgrade and Options Upgrade to the Genesis touchscreen controller for more ramp-hold user programs and additional features, including delay start, preheat, skip-step, and more, for precise firings every time. Messages and Information are available for reviewing a firing profile before or during the firing, and viewing the current segment the firing is in. Options include a bead door, quartz glass viewing window, lid element in quartz rods, Type S thermocouple, vent, and much more! Specific Kiln Information Model and build Model: 2514GFE Equipped with Lid Lift Assist: Yes Inside Chamber Dimensions w x d x h (inches): 37 x 25 x 13.5 Cubic Feet: 5 Outside Dimensions with Stand or Frame w x d x h (inches): 50 x 48 x 43 Brick Thickness: 3″ Maximum Temperature: 1700°F/927°C Est Ship Wt: 465 lbs Wiring Specifications, 1 Phase Volts: 208, 240 Amps: 46 at 208, 40 at 240 Watts: 9,600 Breaker Required: 60 Amp at 208, 50 Amp at 240 Plug Configuration: NEMA 6-50 Copper Wire Size: #6, #4 if the circuit is longer than 40 ft
