Restore precise temperature control and low-odour performance with this Omron controller. It works with the timer and relay to manage the heater during each cycle, helping the unit reach proper incineration temperatures and then shut off as designed. The controller sits inside the control box in the upper-right of the housing, accessible with the top removed. Choose the correct voltage variant before adding to cart. Key Features Coordinates with the timer and relay to control heater power for consistent burn cycles and reduced odour. OEM Omron controller, listed under parts with selectable 120V or 240V options. Located in the control box, easy access once the top cover is removed. Supports safe operation alongside STS and TS limit thermostats. Compatibility Available in two variants, 120V and 240V, select by your unit voltage. Fits Incinolet units using the Omron temperature controller, match by part location and appearance. What’s Included 1 × Omron Controller, select 120V or 240V at purchase. Installation & Care (Quick Tips) Unplug the unit before service. Remove the top cover to access the control box. Label and disconnect the controller leads, swap the controller, then reassemble. After replacement, verify the timer and controller lights and confirm the relay switches the heater correctly during a test cycle. Specs Part name: Omron Controller. SKU: CON018A-1 (120V), CON018A-2 (240V). Location: Control box, upper-right area beneath the top cover. FAQs What does this controller do? It regulates heater operation during the cycle, working with the timer and driving the relay coil that switches heater power. How do I choose the right version? Match your unit voltage, select 120V or 240V, then confirm after installation that the controller and timer lights behave as described in the manual. Where is it located? Inside the control box at the upper-right of the housing, accessible by removing the top.
Related
Related