Restore consistent cycle timing and low-odour performance with this Omron timer. When the Start Switch is pressed, the timer initiates a new burn cycle and works with the temperature controller and relay to power the heater correctly. It sits in the control box at the upper right of the housing, accessible with the top removed. Factory setting is approximately 75 minutes, and the timer has GREEN and RED indicator lights for at-a-glance status. Key Features Works with 120V or 240V Incinolet configurations, one part number for both. Coordinates with the controller and relay to manage heater operation for reliable incineration and reduced odour. Status at a glance, GREEN and RED lights on the timer show power and cycle activity. Factory time setting about 75 minutes, starts a fresh cycle each time the Start Switch is pressed. Compatibility Incinolet units using the Omron timer, 120V or 240V, match by part and location in the control box. What’s Included 1 × Omron Timer, TIM016. Installation & Care (Quick Tips) Unplug the unit and remove the top cover to access the control box. Label leads, replace the timer, reassemble, then confirm the timer and controller lights and proper heater switching during a test cycle. Specs Part name: Timer, Omron. SKU: TIM016. Supply options: 120V or 240V. Location: Inside control box, upper-right under the top cover. FAQs What does the timer control? It defines the burn duration and, together with the controller and relay, governs heater power during the cycle. Where is it located? Inside the control box at the upper right of the unit, accessed by removing the top. Can the burn time be adjusted? Many Omron timers allow adjusting the set time; the Incinolet timer is factory-set to about 75 minutes. If adjustment is needed, consult the manual or an authorized tech, and verify operation by watching the status lights.
Related
Related
Related
Related