Open mesh GRP grating, 25mm thick - non-slip fibreglass flooring Open Mesh GRP Grating is a moulded fibreglass floor panel for walkways, platforms, ramps and covers where a non-slip, corrosion-proof surface is needed. Made from glass reinforced polyester with a resin-coated gritted finish, it is lightweight, chemical and rust resistant, and non-conductive, which makes it a practical alternative to steel, aluminium or timber. This is the 25mm thick panel, supplied in five sheet sizes and three colours, and it can be cut to size in-house or trimmed on site. Key features Non-slip surface - resin-coated gritted finish, slip resistance tested to BS 7976.2 with strong wet and dry performance. Corrosion and chemical resistant - fibreglass will not rust, rot or corrode, and needs no painting. Non-conductive - suitable for electrical and high-voltage environments, and flame retardant to BS 476 Part 7 Class 2. Load rated - certified to BS EN 124 Class A15. Cut to size - standard and bespoke sizes from the in-house cutting service, tolerance +/- 5mm, or trim on site with a hacksaw or jigsaw. Long service life - design life over 10 years, rated from -50 to +110 degrees C for indoor and outdoor use. Where it is used The grating suits any setting that needs safe footing over an open or wet surface: Walkways, platforms and ramps on industrial and construction sites Chemical plants and water treatment works Shipping, docks and offshore installations Utilities and highways access points and covers Wet, oily or greasy areas indoors and outdoors Sizes and colours Panels come in five sheet sizes - 996mm x 996mm, 1492mm x 996mm, 1985mm x 996mm, 3010mm x 996mm and 3660mm x 1220mm - each available in green, grey or yellow. The low profile is wheelchair friendly and suitable for heavy footfall and wheeled traffic. Specification Specification Detail Material GRP glass reinforced polyester, resin-coated gritted surface Thickness 25mm Sheet sizes 996x996, 1492x996, 1985x996, 3010x996, 3660x1220mm Colours Green, grey, yellow Slip resistance BS 7976.2 - extremely low slip potential (wet and dry), low (oily and greasy) Coefficient of friction Dry 72, wet 68, oil 63 Load rating BS EN 124 Class A15 Fire BS 476 Part 7 Class 2; ASTM E84 flame spread 25, smoke density 325 UV ISO 4892-2 Xenon Arc 5000 hours Temperature range -50 to +110 degrees C Conductivity Non-conductive (electrical and high voltage) Cutting tolerance +/- 5mm Design life Over 10 years Customisation Panels are cut to size in-house to suit your opening, with a cutting tolerance of +/- 5mm. Custom colours may be available on request. Fixing clips and clamps are sold separately. Ask about trade-account pricing for framework and bulk orders.
