Brand: Hunter Industries SKU: PGV-201 Product Overview The Hunter PGV-201 is a 2-inch combination globe/angle irrigation valve with female-threaded inlet and outlet connections and integrated flow control. The body can be configured for either globe or angle flow, making it suitable for larger residential, light-commercial, and commercial irrigation systems that need a high-capacity 24 VAC control valve with service access and manual flow adjustment. Hunter rates the PGV-201 for approximately 20 to 150 GPM and a recommended pressure range of 20 to 150 PSI. The valve includes a standard encapsulated 24 VAC solenoid, internal and external manual bleed, captive bonnet bolts, a double-beaded diaphragm, and a flow-control stem for zone balancing or manual shutoff during maintenance. Key Features 2-inch female-threaded inlet and outlet Combination globe or angle installation Integrated flow control Approximate flow range of 20 to 150 GPM Recommended pressure range of 20 to 150 PSI Temperature rating up to 150°F Double-beaded diaphragm External and internal manual bleed Captive bonnet bolts Standard encapsulated 24 VAC solenoid Common Uses Large residential and light-commercial irrigation systems Commercial landscape and large turf zones Globe or angle valve installations Zones requiring high flow capacity and manual flow adjustment Compatibility and Installation Notes Connect to compatible 2-inch female-threaded piping. Configure the body for globe or angle flow according to the system layout. Install with the flow arrow aligned with water movement. Size the valve from design flow, pressure loss, pipe velocity, and available pressure. Use with a compatible 24 VAC controller unless an approved alternate solenoid is installed. Accu Sync regulation, DC-latching solenoids, and reclaimed-water handles are separate options unless specifically ordered. Frequently Asked Questions Can the PGV-201 be installed as a globe or angle valve? Yes. Hunter identifies this 2-inch model as a combination globe/angle valve. Does it include flow control? Yes. The built-in flow-control stem can be used for zone balancing or manual shutoff. Is 150 GPM the recommended operating flow? No. It is the published upper flow limit. The design flow must be selected from the system’s pressure-loss, velocity, piping, and downstream-demand requirements. Why Buy from Big Frog Supply? Big Frog Supply carries Hunter PGV valves, solenoids, diaphragms, pressure regulators, controllers, and commercial irrigation repair components.
Related
Related
Related
Related