The Pikachu Face Toploader Binder is a Pokemon toploader binder built in bright yellow PU leather around 252 side-loading slots sized exactly for standard 3"×4" toploaders. Full-zip closure. Zero metal rings. Pikachu's face stitched across the cover, small black eyes and deep red cheek dots. Turn it over and the black ear tips and two black tail stripes are stitched on the back, with a lightning-bolt zipper pull at the seam. Nobody has to ask what's on the cover. Pikachu's face is stitched straight into the leather, ear tips and tail stripes on the back, so it reads from either side. Inside, 252 toploader slots across 15.4 inches of binder. That's the size you carry once your Pikachus have moved past sleeves. The Surfing, the Flying, the alt arts you stopped risking in a soft sleeve. Set it on the table at trade night and somebody picks it up before you offer it. Specs Height: 15.4"Width: 12.6"Depth: 2.4"Capacity: 252 cards (28 pages × 9 pockets per page)Pocket Size: 3.3" × 4.3" Key Features: 252-Toploader Capacity: 28 pages, 9 slots each, all cut for standard 3"×4" toploaders. Enough room to run every Pikachu that earned its plastic and still leave space for the promos that show up twice a year. PSA-Level Protection: Acid-free, PVC-free pages behind a zip that seals the whole way around. Slab-grade care for your best pulls, and the card never has to leave your hands to get it. Ring-Free Build: No D-rings, no metal, nothing to press a crease into a corner. Every toploader sits flat against the page instead of stacking up around a ring. ClearLock™ Side-Loading Pockets: Cards go in from the side, so a toploader stays put even when the binder's upside down in your bag. Clear enough that the cheeks, the sparks, and the foil all still read through the plastic. Lightning Bolt Zipper Pull: A Pikachu bolt cast right into the pull, easy to find without looking down. The zip runs the full perimeter and shuts out dust, crumbs, and whatever else is already on the trade table. Acid-Free, PVC-Free Pages: Ten years in, the yellow on the card still matches the yellow from the day you pulled it. No haze, no sticking, no slow fade. Stitched Pikachu Face Cover: Not an embossed shape. The face is stitched into bright yellow leather panel by panel, small black eyes, deep red cheeks, thread you can feel with a thumb. Black ear tips and two tail stripes stitched across the back, so both sides read as Pikachu. Who It's For: For the Pikachu collector whose best cards moved into toploaders while the binder never caught up. It's also the easiest gift in the toploader lineup, because Pikachu is the one answer almost every Pokemon collector agrees on, and the stitched face makes it obvious what it is before the wrapping's even off. Ships in a Ravaver gift box. Drop a Pikachu card into the first slot and the gift's done. Backed By Ravaver: Free 2-year warranty on every binder. If something goes wrong, we make it right. No fine print, no chasing receipts. FAQ What size toploaders fit in this binder?Standard 3"×4" toploaders, the most common size for raw Pokemon cards. Slide them in side-loaded, snug fit, no forcing. Will graded slabs fit?No. This binder's built specifically for toploaders, which are thinner than graded slabs. If your card's in a toploader, this is the binder for it. If it's been graded and slabbed, you'll want a binder sized for slabs. Face or embossed—which Pikachu Toploader Binder is which?Same 252-toploader build in both. Same slot count, same ClearLock pockets, same lightning-bolt pull, same warranty. The Pikachu Toploader Binder has him embossed into the leather, a pressed silhouette you catch up close. This one has the full face stitched across the front in thread, with ear tips and tail stripes on the back. One of them is for collectors who want it understated. This one isn't. Card Binder or Toploader Binder—which one for my Pikachus?Comes down to what the cards are wearing. Sleeved Pikachus go in the Pikachu Face Card Binder, 360 of them in the 13.8" size. Once they're in 3"×4" toploaders, usually the full arts, promos, and alt arts, they need this one. Plenty of collectors run both. Sleeves in the small one, plastic in the big one.
