MULTIMAP // 200-280 HPStage 1,2,3, economy map , launch control & dash reflash This is a fully software integrated solution, no hardware required except a free flowing exhaust and some adjustable ramps in the primary clutch. We also have a fully adjustable launch control included (Adjustable via the factory dash). This product includes the Dash upgrade to control the selection of map included and adjust the Launch control.The Precision EFI knock system is include in all our reflash. Perfect for the trail. Click here for Multimap explanation guide Important: This Stage 3 Flash has been calibrated specifically for the stock air intake combined with the exhaust back pressure provided by our famous Stainless Steel Quiet 2.5 Exhaust. Precision EFI ensures perfect operation of this Stage 3 only with this type of exhaust silencer with internal partitions. Any other too free flow exhaust such as race can or straight pipe could seriously damage your engine. Please take note that this power package requires the addition of some adjustable ramps in the primary clutchRamp adjustment starting point For a stock spring and helix combination in good condition, to achieve the target RPM. Please note; a modified spring and helix combination affects the final result. Therefore, we cannot provide settings for every application. The test should be performed as follows: accelerate quickly but gradually to avoid track slippage. While accelerating, wait for the RPM to stabilize, then take an RPM reading. If the RPM is too high, add weight; if too low, reduce the weight. Note that surface conditions vary and affect RPM. - Target RPM: 9000 - Team Clutch : Adjustable Ramp Kit Dalton Qa2-76 empty -Adapt Clutch : Adjustable Ramp Kit Dalton Qa3-65 set to a total of 66 g (use purple Loctite) - A screw head flush with the top of the hole (at the heel) is the most common setting.
Related
Related
Related
Related