Product Description A towable stump grinder has to be dragged to every stump. A skid steer stump grinder drives there. The Quick Attach Quick Stump Away mounts to the machine you already run, which means it gets into tight spots between trees and near structures without tearing up the property on the way in. The cutting wheel is a 1/2-inch thick, 24-inch steel plate carrying 32 replaceable carbide teeth, and it cuts bi-directionally. That matters more than it sounds: you sweep across the stump in both directions without repositioning the skid steer, which roughly halves the number of times you reset on a big stump. There is no gearbox. The motor drives the wheel directly, so there is one less assembly to service and one less thing to fail under load. The wheel takes stumps up to 32 inches in diameter down to 8 inches below ground across a 55 degree cutting arc. Two flow configurations are available. Standard flow runs 15 to 30 GPM with a wheel speed of 500 to 1,000 RPM, and high flow runs 31 to 42 GPM at 900 to 1,200 RPM. Both require a case drain. An optional 3-sided Green Teeth package lets you rotate teeth to a fresh edge instead of replacing them. Ideal For: Arborists, tree services, landscapers, and municipal maintenance departments who already run a skid steer and want stump grinding capability without a second machine to tow, fuel, and maintain. Key Features Bi-Directional Cutting Design: Cuts forward and reverse so you sweep the stump without moving the machine. 1/2-Inch by 24-Inch Steel Cutting Wheel: Heavy plate wheel built to carry load through hardwood and buried rock. 32 Replaceable Carbide Teeth: Long-lasting teeth that renew the cutting edge instead of the wheel. Direct Drive, No Gear Box: One less assembly to service and one less failure point under load. 32-Inch Maximum Cutting Diameter: Takes on large stumps without repositioning around them. 8 Inches Below Ground: Deep enough to plant, sod, or build over the old stump location. Standard and High Flow Versions: 15 to 30 GPM or 31 to 42 GPM to match your machine. Optional 3-Sided Green Teeth: Rotate to a fresh edge and cut downtime between tooth changes. 540 lb Operating Weight: Manageable on a wide range of skid steers. Technical Specifications Specification Standard Flow High Flow Part Number 900550 / 901966 900551 / 901967 Hydraulic Flow Requirements 15-30 GPM 31-42 GPM Cutting Wheel Speed 500-1,000 RPM 900-1,200 RPM Cutting Wheel Diameter 24 in. 24 in. Cutting Wheel Thickness 1/2 in. steel plate 1/2 in. steel plate Teeth 32 replaceable carbide 32 replaceable carbide Cutting Arc 55 degrees 55 degrees Maximum Cutting Diameter 32 in. 32 in. Maximum Cutting Depth 8 in. below ground 8 in. below ground Drive Direct Drive, No Gear Box Direct Drive, No Gear Box Case Drain Required Required Operating Weight 540 lb. 540 lb. Available Options Green Teeth Full Set of Replacement Teeth Replacement Threaded Tooth Holder 5/8 in. x 2 in. Recessed Holder Bolt Pistol Grip Control Harness Loader Specific Wire Harness Factory Installed Case Drain Coupler Factory Installed Couplers Factory Installed High Flow Couplers What's Included Quick Attach Quick Stump Away Stump Grinder in selected flow configuration Operator Manual Drive to the stump instead of towing to it. Request a quote on the Quick Stump Away.