Ramuc Clean & Prep Solution is a concentrated, biodegradable formula that cleans, degreases, and opens surface pores to improve paint adhesion. It replaces traditional acid etching and TSP, simplifying surface preparation for pool painting. Safe for use on concrete, plaster, fiberglass, and painted surfaces, it is VOC compliant, fume-free, and non-toxic to surrounding vegetation. Also suitable for cleaning pool filter elements. Pro Tip: Proper surface preparation is the most important step in pool painting - skipping it is the #1 cause of peeling and coating failure. Why Choose Ramuc Clean & Prep Solution? Improves Adhesion: Opens surface pores for proper paint bonding on all compatible surfaces. Replaces Harsh Chemicals: Eliminates the need for acid etch and TSP with a safer, all-in-one solution. Safe & Eco-Friendly: VOC compliant, odor-free, and biodegradable - safe to use near plants and landscaping. Multi-Surface Use: Effective on plaster, concrete, fiberglass, and previously painted finishes. Cost-Effective Coverage: Concentrated formula makes up to 4 gallons and treats up to 800 sq. ft. Surface Preparation & Application Before You Start: Complete all repairs and pressure wash the surface to remove loose debris, dirt, and buildup. Mix Solution: Dilute according to manufacturer directions. Pre-wet Surface: Dampen the entire area with clean water before application. Apply Evenly: Use a garden sprayer to distribute the solution across the surface. Scrub Thoroughly: Use a stiff bristle brush and continue scrubbing until foaming stops. Rinse Completely: Rinse thoroughly until all foam is gone and runoff water is clear. Important: Do not allow the solution to dry on the surface. Always rinse while still wet to avoid residue and ensure proper adhesion. Dryness Test: Before painting, perform a condensation test to confirm the surface is fully dry. Additional Uses Pool Filter Cleaning: Mix 1 gallon of solution with 5 gallons of hot water, soak filter elements for 1 hour, then rinse thoroughly. Avoid Use: In temperatures below 50°F or above 85°F On sealed or stained surfaces As a sole cleaner on unpainted fiberglass without abrasion With pressure washers during rinsing - use a garden hose only
