THIS IS NOT YOUR AVERAGE FAKE LEATHER Our Leatherette measure 12" x 24" and is approximately 1.85 mm thick. Made with a true single layer construction which won't split or peel. Each sheet comes standard with heat-activated adhesive. Our thicker leather is made specifically for hats, helping prevent the center seam from showing through after pressing. The result is a cleaner, more professional looking patch hat. LASERING TIPS:For best results, engrave with minimal air assist to reduce char. Once you're ready to cut, turn your air back on. Remove any leftover residue using LA’s Totally Awesome or a similar cleaner. Wipe clean with a microfiber towel. PRESSING TIPS:For best results, use a dual platen heat press and a foam pad• Top Platen: 280°F• Bottom Platen: 320°F• Pressure: Medium (4–6)• Preheat Hat: Press for 10 seconds to remove moisture and wrinkles• Press Time: 45 seconds Use a temperature gun to confirm your press settings, and always test on scrap hats to fine tune your pressure, or you might waste patches. PRODUCT VARIATION:Leatherette colors may vary slightly from the images due to screen settings and material batches. If you're unsure about the color, we recommend ordering the sample pack first to see it in person before placing a larger order.
