50 watts, a moving magnet phono stage and a Rega-designed DAC with coaxial and optical inputs — in a half-width case. The Brio Mk7 is the model where Rega adds digital. It carries a Rega-designed onboard DAC with two S/PDIF inputs — isolated coaxial at 0.5V into 75 ohms, and Toslink optical — handling sample rates from 32kHz all the way to 192kHz. That single addition is the main reason to step up from the io. Power rises to 50 watts per channel into 8 ohms and, usefully, Rega publishes a 4-ohm figure too: 72 watts. Only a minority of Rega integrateds get a published 4-ohm rating, so if you own a demanding pair of speakers this is worth knowing. The integrated phono stage is moving magnet. There are three line inputs, an onboard headphone socket with a dedicated circuit, and a custom mini system remote. Distortion is typically 0.005% at 1kHz, A-weighted. It comes in Rega’s custom half-width aluminium case at 4.9kg, with short-circuit protection, a thermal cut-out and auto standby. Features 50W per channel into 8 Ω, 72W into 4 Ω Rega-designed onboard DAC with isolated coaxial and Toslink optical inputs Sample rates 32, 44.1, 48, 88.2, 96, 176.4 and 192kHz Integrated Rega moving magnet phono stage Three line inputs Onboard headphone output with a dedicated circuit THD typically 0.005% at 1kHz, A-weighted Custom half-width aluminium case, 4.9kg Specifications Type: Integrated amplifier with moving magnet phono stage and DAC Power Output: 50W per channel into 8 Ω; 72W per channel into 4 Ω Line Inputs: Three Phono Stage: Integrated Rega moving magnet stage DAC: Rega-designed, with two digital inputs — S/PDIF isolated coaxial (0.5V, 75 Ω) and S/PDIF optical Toslink DAC Sample Rates: 32, 44.1, 48, 88.2, 96, 176.4 and 192kHz Headphone Output: Yes, with a dedicated circuit Remote Control: Custom mini system remote supplied THD and Noise: Typically 0.005% at 1kHz, A-weighted Protection: Short circuit protection, thermal cut-out, standby and auto standby Dimensions: 216 x 79 x 365 mm (8.5 x 3.1 x 14.4″), custom half-width aluminium case Weight: 4.9kg (10.8 lb) Power Consumption: 200W; 0.4W standby Origin: Made in England. Rega Research Ltd, Southend-on-Sea, Essex Warranty: Lifetime Limited Warranty against confirmed manufacturing defects. It excludes wear and tear and parts considered consumable, and Rega states that unauthorised modification or failure to follow its guidelines may invalidate it Not Published: DAC bit depth — Rega publishes sample rates for the Brio but states 16 to 24-bit only for the Elex and Elicit, so we have not carried that claim across; any preamp or record output, which Rega does not list for this model. If you need a pre-out for a subwoofer, check with us first rather than assuming
