The Splash Splitter attaches to your saw bed to securely hold your back splash in place while you cut it thinner. You can clamp the Splash Splitter on the saw’s table after lining up the cut. Then hook up and turn on your compressor to create the vacuum. Now place the splash against it and the vacuum will securely hold the splash in place while you step cut it thinner. The Splash Splitter will hold a 10” piece, a 10’ piece, or even longer! It has 10 evenly dispersed vacuum suction cups. You are only limited to twice the depth your saw can cut. If your arbor plate is in the way and it’s too deep, you can flip the piece over and the splash will be exactly where you want it to be so you can continue. This jig makes cutting a backsplash simple with great results every time. You will need a 5 CFM or greater compressor to run this unit. Alternate names are: Splash Jig, Splash Clamp for Bridge Saw Additional information: Weight 100 lbs Packaging Dimensions 102" x 7" x 6" Product Dimensions 100" x 5" x 3"
